Abstract:Context. The digital signal processing is applied in many fields of science, technology and human activity. One of the ways of implementing algorithms of digital signal processing is the development of coprocessors as an integral part of well-known architectures. In the case of developing a pipelined device, the presented approach will allow to use software and hardware tools of the appropriate architecture, provide the faster execution of signal processing algorithms, reduce the number of cycles and memory accesses. Objective. Objectives are design and characterization study of a pipelined RISC-V processor and coprocessor of digital signal processing which performs fast Fourier transform. Method. Analyzing technical literature and existing decisions allow to assess advantages and disadvantages of modern developments and on the basis of which to form the relevance of the selected topic. Model designing and simulation results allow to examine a model efficiency, to determine weak components’ parts and to improve model parameters. Results. The pipelined RISC-V processor has been designed which executes a basic set of instructions. Execution time of assembly program on the single-cycled and the pipelined processors have been analyzed. According to the results, the test program on the pipelined processor is executed in 29 cycles, while on the single-cycle processor it takes 60 cycles. The structure of the coprocessor for the fast Fourier transform algorithm and a set of processor instructions that allow working with the coprocessor have been developed. The number of cycles of the coprocessor based on Radix-2 fast Fourier transform algorithm for 512 points is 2358 cycles, and for 1024 points is 5180 cycles. Conclusions. Conducted researches and calculations have showed that the application of the developed hardware coprocessor reduces the fast Fourier transform algorithm execution time and the load of the pipelined processor during calculations.

Design for Testability of a 32-Bit MIPS Processor and Its Implementation

Design of Hardware Pipelining Processor

Design of 16 Bit RISC Processor and Implementation using MIPS Technique

VLSI Implementation of a 32bit Embedded Reduced-Instruction-set-computer

Simulation and Design of MIPS Processor Based on VLSI Platform

Design and hazard solving of five-stage pipeline RISC-V processor structure

Vlsi Implementation of A High-Performance 32-Bit Risc Microprocessor

A Fully Automated Large-Scale Addressable Test Chip Design with High Reliability

Design and Performance Analysis on Static and Dynamic Pipelined CPU in Course Experiment of Computer Architecture

A multi-FPGA based platform for emulating a 100m-transistor-scale processor with high-speed peripherals (abstract only)

Research on testing of 32-bit CPU based SiP

Design of a CPL-Based Pipeline Multiplier Accumulator for 32-Bit CPU

Design of High Performance and Lower Power Processor Based on 65 nm Technology

Design and Verification of Three-stage Pipeline CPU Based on RISC-V Architecture

Design of RISCV processor using verilog

Design, development and testing of a 16-bit reduced instruction set computer architecture based processor

THE DESIGN OF THE PIPELINED RISC-V PROCESSOR WITH THE HARDWARE COPROCESSOR OF DIGITAL SIGNAL PROCESSING

Design and application of test structure array based on modular unit

A Microprocessor Based SOC Built-In Test Scheme

The Design of RISC Core by Super-scalar and Super-pipelined Fixed-point Technique

Functional Verification Methodology of A 32-Bit Risc Microprocessor