Abstract:The technology development of micro-nano electronics in global IC industry is summarized and reviewed in the present paper. There are many challenges and opportunities as the innovative devices and materials have gradually been applied to IC manufacture. As ITRS 2011 Roadmap shows that gate length will shrink to 20 nm in 2013, the industry mainstream manufacturing technologies of the nano-electronics seems moving toward the goal. It is well known that the IC technology development basically depends on material science. In Section 2, some new material and process technologies are highlighted, such as strained silicon, high K and metal gate, ultra-low K, 450 mm silicon wafer, and immersion lithography technologies are the foundation of IC manufacture. The process integration for advanced CMOS manufacture technology is discussed in Section 3. As an example, 20 nm process flow scheme is explained and some comparison is made to the precious generation technology. The main process flow difference between 28 nm technology and 20 nm technology is illustrated and some explanations are presented. In Section 4, 3D system packaging technology is introduced. Some preliminary TSV experimental data made by SMIC are shown. It is expected that 3D TSV Wide I/O would eventually be inevitable in 28 nm production and beyond. In Section 5, the research and development of nonvolatile memory are summarized, such as RRAM, PcRAM and MRAM. Some lab experimental and measurement results from SMIC are demonstrated. It is believed that PcRAM, which is relatively mature technology, mass production will probably come up in the mainland in a few years. In Section 6, a couple of new transistor architectures are introduced and some experimental data are demonstrated, such as local SOI and GAA, and some experimental data are shown. Finally, the comments for domestic R&D strategy in IC area are proposed to future IC R&D direction.

Design and application of test structure array based on modular unit

A Fully Automated Large-Scale Addressable Test Chip Design with High Reliability

Addressable Test-Chip Compiler for Test Chip Design Automation and Transistor/yield Characterization

Using Nmos Transistors As Switches For Accuracy And Area-Efficiency In Large-Scale Addressable Test Array

An improved method for test chip design

Challenges for Progress in Test and Design for Testability

A novel layout automation flow to facilitate test chip design for standard cell characterization

Testing Structure for Detection of Poly Stringer Defects in CMOS ICs

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

Research of placement of test structure in addressable test chip

Advanced Low Pin Count Test Architecture for Efficient Multi-Site Testing

Design And Automatic Generation Of Area-Efficient Ring Oscillator Based Addressable Test Chips

Design of the Addressable Test Structure for ${S}$ -Parameter-based RF Device Characterization

A Simulation-Data-Driven Tolerance and Structure Integrated Design Method for Planar Arrays

Nanometer Interconnect Test Structure for Modeling of Process Variation

Hierarchical Timing-driven Layout Based on .25um Technology

Non-probabilistic reliability-based structural design optimization based on the interval analysis method

A LabVIEW Based Automatic Test System for Sieving Chips

SOC test architecture design for efficient utilization of test bandwidth

FATE: A Flexible FPGA-Based Automatic Test Equipment for Digital ICs

Testability Design of MPEG-2 Decoder Chip Based on Module Partition