Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Preparation and Characterization of Titanium Dioxide Nanoparticle/polystyrene Composites Via Radical Polymerization

Encapsulation of Titanium Dioxide Particles by Polystyrene Via Radical Polymerization

Preparation and Structure of Polystyrene/Montmorillonite Nanocomposite

A Nanocomposite Structure Based on Modified MCM-48 and Polystyrene

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Study on nano TiO2 grafted with polystyrene and its resistance to UV aging

Preparation of Hybrid Polymer Nanocomposite Microparticles by a Nanoparticle Stabilised Dispersion Polymerisation

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Study on PS/TiO2 Nanocomposite Particles

Mechanism and Process of the Redispersion of the Aggregated Nano-Sio2 Particles During Emulsion Polymerization of Styrene

Thermal Properties and Combustion Behaviors of Polystyrene/Surface-Modified TiO 2 Nanotubes Nanocomposites

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

Preparation, characterization, and properties of TiO<sub>2</sub>/PLA nanocomposites by in situ polymerization

Preparation and characterization of nano-TiO2/polylactide composites

In-situ Emulsion Polymerization of Styrene in the Presence of Nano-Sio2

Preparation and Characterization of Polympropylene Grafting Maleic Anhydride/Sio2 Composite-Supported Titanium Catalysts

A study on the kinetics and thermal properties of polystyrene/diatomite nanocomposites prepared via in situ ATRP

Preparation of Polymer Hollow Microspheres Covered by Polymer Solid Particles Via Two Polymerization Steps

Synthesis of TiO2–SiO2/polymer Core–shell Microspheres with a Microphase‐inversion Method

Preparation, characterization, and properties of polystyrene/Na-montmorillonite composites

Miniemulsion Polymerized Titania/polystyrene Core–shell Nanocomposite Particles Based on Nanotitania Powder: Morphology, Composition and Suspension Rheology