Abstract:Biocompatibility, particularly blood compatibility is the most important property required for biomedical materials. The improvement of blood compatibility is always an important research task for biomaterial research and development. It is an important way to develop biomaterials by constructing special molecules onto the proper mechanical material surface. Polyetherurethanes are widely used as biomaterials due to their good biocompatibility and mechanical properties. Nevertheless, their blood compatibility is still not adequate for the more demanding applications. The purpose of present study was to synthesis a novel nonthrombogenic biomaterial by modifying the surface of polyetherurethane. Ozone was used to introduce active peroxide groups onto polyetherurethane surface and graft polymerization of N, N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) ammonium (DMMSA), a sulfobetaine structure, onto the ozone activated polyetherurethane surface was conducted. The nonthrombogenic properties of grafted film were also studied. The grafted film was characterized by ATR-FTIR, XPS and contact angle measurement. The ATR-FTIR, XPS of the grafted PU film indicated that the graft polymerization did take place, the grafted PU film surface was covered with the DMMSA polymer. The grafting yields in different condition were studied. The grafting yields increased with the increase of the monomer concentration. Water absorption and contact angle showed that the hydrophilicity of the film had been improved greatly, and the hydrophilicity of the film increased with the grafting yield. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma and scanning electron microscopy observation using PU film as the reference. No platelet adhesion was observed for the grafted films incubated for 60 min and 180 min, however, the ungrafted PU film was covered with platelet. The result of platelet adhesion experiment indicated that the PDMMSA chains could prevent platelet adhesion. That means this new material is expected to have potential biomedical applications.

Surface modification of SPEU films by ozone induced graft copolymerization to improve hemocompatibility

Surface modification of segmented poly(ether urethane) by grafting sulfo ammonium zwitterionic monomer to improve hemocompatibilities

Grafting sulfobetaine monomer onto the segmented poly(ether-urethane) surface to improve hemocompatibility

Platelet adhesive resistance of segmented polyurethane film surface-grafted with vinyl benzyl sulfo monomer of ammonium zwitterions.

Synthetic studies on blood compatible materials. VIII. Poly(ether-urethane) surface grafted with sulfo-ammonium zwitterion monomer activated by ozone

Ozone-induced grafting of a sulfoammonium zwitterionic polymer onto low-density polyethylene film for improving hemocompatibility

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Chemical grafting of sulfobetaine onto poly(ether urethane) surface for improving blood compatibility

Cytocompatibility of new-type sulfonated polymer surfaces

Polyurethane vascular catheter surface grafted with zwitterionic sulfobetaine monomer activated by ozone.

Grafting sulfobetaine monomer onto silicone surface to improve haemocompatibility

Blood Compatibility of Polyurethane Surface Grafted Copolymerization with Sulfobetaine Monomer.

Grafting of Sulfobetaine Onto A Polyurethane Surface to Improve Blood Compatibility

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion.

Grafting Sulfoammonium Zwitterionic Brushes Onto Polycarbonateurethane Surface to Improve Hemocompatibility

Surface Coating of Stearyl Poly(ethylene Oxide) Coupling-Polymer on Polyurethane Guiding Catheters with Poly(ether Urethane) Film-Building Additive for Biomedical Applications

Ozone-induced grafting phosphorylcholine polymer onto silicone film grafting 2-methacryloyloxyethyl phosphorylcholine onto silicone film to improve hemocompatibility

Chemically Induced Graft Copolymerization Of 2-Hydroxyethyl Methacrylate Onto Polyurethane Surface For Improving Blood Compatibility

Grafting of Poly(ethylene Glycol) Monoacrylates on Polycarbonateurethane by UV Initiated Polymerization for Improving Hemocompatibility

Surface Characterization of Blood Compatible Amphiphilic Graft Copolymers Having Uniform Poly(ethylene Oxide) Side Chains

Surface Modification of Polycarbonate Urethane by Grafting Polyethylene Glycol and Bivalirudin Drug for Improving Hemocompatibility