Abstract:The aim of this work is to provide a new kind of polyurethane with improved surface blood compatibility for long-term blood-contacting biomaterials. In the study, an aliphatic poly(ester-urethane) (H-PEU) with uniform-size hard segments was synthesized by one-step chain extension of poly(ε-caprolactone) (PCL) with diurethane diisocyanate (HBH), and biomimetic phosphorylcholine (PC) groups were immobilized onto the film surface with high grafting efficiency by three-step chemical treatments under mild reaction conditions. The H-PEU film was firstly treated with 1,6-hexanediisocyanate (HDI) to introduce -NCO groups on the surface (H-PEU-NCO) through an allophanate reaction; the -NCO groups were then coupled via a condensation reaction with one of -NH2 groups of tris(2-aminoethyl)amine (TAEA) to immobilize -NH2 on the surface (H-PEU-NH2); finally, the double bond of 2-methacryloyloxyethyl phosphorylcholine (MPC) reacted with -NH2 by Michael addition reaction to obtain MPC-grafted H-PEU (H-PEU-MPC). The modified surfaces were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The results verified that MPC was successfully grafted onto H-PEU surface with high grafting density. The blank and modified films showed similar crystallization behaviors, thermal stabilities and mechanical properties, indicating that the chemical treatments had minimum influence on the physicochemical properties of the substrate. The H-PEU-MPC displaying a much lower water contact angle (~15.2°) than H-PEU (80.3°) meant that the hydrophilic PC functional groups improved the surface hydrophilicity significantly. The surface blood compatibility was examined by bovine serum albumin adsorption and platelet adhesion tests, and the results revealed that H-PEU-MPC had improved resistance to protein adsorption and platelet adhesion capacity. The MPC-grafted H-PEU film possessed outstanding mechanical properties (ultimate stress: 36.1 MPa; strain at break: 883%), low protein adsorption quantity (1.33 μg/cm2) and good anti-platelet adhesion capacity (582 ± 16 per mm2), implying its high potential to be applied as biomaterials for vascular grafts, subcutaneously implanted devices or other blood-contacting devices.

Surface Characterization of Blood Compatible Amphiphilic Graft Copolymers Having Uniform Poly(ethylene Oxide) Side Chains

Characterization Of Amphiphilic And Microphase-Separated Graft-Copolymers .2. Surface Characterization And In-Vitro Blood-Compatibility Assessment Of Polystyrene-Graft-Omega-Stearyl-Poly(Ethylene Oxide)

Methacrylate polymer layers bearing poly(ethylene oxide) and phosphorylcholine side chains as non-fouling surfaces: in vitro interactions with plasma proteins and platelets.

Effects of Solvent Treatment on Surface Morphology and Composition of Poly(Methyl Methacrylate)-G-Poly(Ethylene Oxide)

Surface modification of SPEU films by ozone induced graft copolymerization to improve hemocompatibility

Synthetic studies on blood compatible materials. VIII. Poly(ether-urethane) surface grafted with sulfo-ammonium zwitterion monomer activated by ozone

New-Type Sulphonated Polymer Surfaces for Improving Blood Compatibility

Surface Modification of Polypyrrole Films Via Grafting of Poly(ethylene Glycol) for Improved Biocompatibility

Surface Property and Blood Compatibility of Biomolecular Modified Polyurethane

Effects of oligoethylene oxide monoalkyl(aryl) alcohol ether grafting on the surface properties and blood compatibility of a polyurethane.

Grafting of Poly(ethylene Glycol) Monoacrylates on Polycarbonateurethane by UV Initiated Polymerization for Improving Hemocompatibility

Chemically Induced Graft Copolymerization Of 2-Hydroxyethyl Methacrylate Onto Polyurethane Surface For Improving Blood Compatibility

Surface Coating of Stearyl Poly(ethylene Oxide) Coupling-Polymer on Polyurethane Guiding Catheters with Poly(ether Urethane) Film-Building Additive for Biomedical Applications

Polypropylene modified with 2-hydroxyethyl acrylate-g-2-methacryloyloxyethyl phosphorycholine and its hemocompatibility

Various-Sized Stearyl Poly(Ethylene Oxide) Coupling-Polymer Blending Poly(Ether Urethane) Material for Surface Study and Biomedical Applications

A Mild Method for Surface-Grafting MPC Onto Poly(ester-Urethane) Based on Aliphatic Diurethane Diisocyanate with High Grafting Efficiency.

Study on the Properties of Polyethylene Surface Grafted with MPC by UV Radiation

Grafting sulfobetaine monomer onto the segmented poly(ether-urethane) surface to improve hemocompatibility

Surface Modification of Polypropylene Film by Radiation‐induced Grafting and Its Blood Compatibility

Biocompatible Polypropylene Prepared by a Combination of Melt Grafting and Surface Restructuring

Ozone-induced grafting of a sulfoammonium zwitterionic polymer onto low-density polyethylene film for improving hemocompatibility