Abstract:The aim of this work is to provide a new kind of polyurethane with improved surface blood compatibility for long-term blood-contacting biomaterials. In the study, an aliphatic poly(ester-urethane) (H-PEU) with uniform-size hard segments was synthesized by one-step chain extension of poly(ε-caprolactone) (PCL) with diurethane diisocyanate (HBH), and biomimetic phosphorylcholine (PC) groups were immobilized onto the film surface with high grafting efficiency by three-step chemical treatments under mild reaction conditions. The H-PEU film was firstly treated with 1,6-hexanediisocyanate (HDI) to introduce -NCO groups on the surface (H-PEU-NCO) through an allophanate reaction; the -NCO groups were then coupled via a condensation reaction with one of -NH2 groups of tris(2-aminoethyl)amine (TAEA) to immobilize -NH2 on the surface (H-PEU-NH2); finally, the double bond of 2-methacryloyloxyethyl phosphorylcholine (MPC) reacted with -NH2 by Michael addition reaction to obtain MPC-grafted H-PEU (H-PEU-MPC). The modified surfaces were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The results verified that MPC was successfully grafted onto H-PEU surface with high grafting density. The blank and modified films showed similar crystallization behaviors, thermal stabilities and mechanical properties, indicating that the chemical treatments had minimum influence on the physicochemical properties of the substrate. The H-PEU-MPC displaying a much lower water contact angle (~15.2°) than H-PEU (80.3°) meant that the hydrophilic PC functional groups improved the surface hydrophilicity significantly. The surface blood compatibility was examined by bovine serum albumin adsorption and platelet adhesion tests, and the results revealed that H-PEU-MPC had improved resistance to protein adsorption and platelet adhesion capacity. The MPC-grafted H-PEU film possessed outstanding mechanical properties (ultimate stress: 36.1 MPa; strain at break: 883%), low protein adsorption quantity (1.33 μg/cm2) and good anti-platelet adhesion capacity (582 ± 16 per mm2), implying its high potential to be applied as biomaterials for vascular grafts, subcutaneously implanted devices or other blood-contacting devices.

Chemical grafting of sulfobetaine onto poly(ether urethane) surface for improving blood compatibility

Grafting sulfobetaine monomer onto the segmented poly(ether-urethane) surface to improve hemocompatibility

Reduced Platelet Adhesion on the Surface of Polyurethane Bearing Structure of Sulfobetaine

Grafting of Sulfobetaine Onto A Polyurethane Surface to Improve Blood Compatibility

Platelet Adhesion on a Polyurethane Surface Grafted with a Zwitterionic Monomer of Sulfobetaine Via a Jeffamine Spacer

Enhanced Blood Compatibility of Polyurethane Functionalized with Sulfobetaine.

Surface Property and Blood Compatibility of Biomolecular Modified Polyurethane

Surface modification of segmented poly(ether urethane) by grafting sulfo ammonium zwitterionic monomer to improve hemocompatibilities

Synthetic studies on blood compatible materials. VIII. Poly(ether-urethane) surface grafted with sulfo-ammonium zwitterion monomer activated by ozone

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion.

Blood Compatibility of Polyurethane Surface Grafted Copolymerization with Sulfobetaine Monomer.

Platelet adhesive resistance of polyurethane surface grafted with zwitterions of sulfobetaine.

Surface modification of SPEU films by ozone induced graft copolymerization to improve hemocompatibility

Platelet adhesion onto segmented polyurethane surfaces modified by carboxybetaine.

Cytocompatibility of new-type sulfonated polymer surfaces

A Mild Method for Surface-Grafting MPC Onto Poly(ester-Urethane) Based on Aliphatic Diurethane Diisocyanate with High Grafting Efficiency.

Chemical modification of polysulfone membrane by polyethylene glycol for resisting drug adsorption and self-assembly of hepatocytes

Surface Modification of Polycarbonate Urethane by Grafting Polyethylene Glycol and Bivalirudin Drug for Improving Hemocompatibility

A Facile Preparation of Poly(ethylene Oxide)-Modified Medical Polyurethane to Improve Hemocompatibility

Hemocompatibility evaluation of polyurethane film with surface-grafted poly(ethylene glycol) and carboxymethyl-chitosan

Synthesis of Polyurethane-Graft-Sulfonate and Its Study of Blood-Compatibility