Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Advanced aerostatic stability analysis of cable-stayed bridges using finite-element method

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Prediction of the aerodynamic instability of ice-accreted bridge cables using different stability criteria

Aerodynamic stability of ice-accreted bridge cables

Aerostatic stability of long-span cable-stayed bridges: Parametric study

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Nonlinear Aerostatic Stability Analysis of Jiang Yin Suspension Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

The aerodynamic stability of a new type of Multi-tower cable-stayed bridge with rhombic stiffening cables

Aerostatic stability analysis of suspension bridges under parametric uncertainty

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Nonlinear Stability Analysis of a Composite Girder Cable-Stayed Bridge with Three Pylons during Construction

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method