Abstract:Mode division multiplexing on chips can enhance optical interconnect capacity tremendously, avoiding expensive wavelength division multiplexing technology. It is a critical functionality to switch or process different mode channels together for future optical network-on-chip based on mode division multiplexing. However, controlling different modes simultaneously in the traditional wide multimode waveguide is very difficult due to very different optical properties of the modes. Here, we introduce a novel concept to realize compact multimode 3 dB couplers, which can process multiple modes of a densely-packed waveguide array bus waveguide simultaneously. A dual-mode 3 dB coupler with two input and two output bus waveguides, each of which supports two transverse electrical modes, is designed with simulated insertion losses of less than 0.23 dB and crosstalks of similar to-18.1 dB for both modes at the central wavelength. The relative phases at the two outputs are 90 degrees for both modes theoretically. The designed device has a short coupling length of 21 mu m with SiO2 cladding. The fabricated one demonstrates insertion losses of similar to 0.3 dB and similar to 0.5 dB and crosstalks of -19.6 dB and -14.1 dB for the two modes, respectively. A triple-mode 2 x 2 3 dB coupler, consisting of six coupled waveguides in the coupling region of 87 mu m length, shows average insertion losses and crosstalks for all three modes of similar to 0.25 dB and similar to-14 dB, respectively. The present design method is also extended to 3 dB couplers for more modes theoretically.

Half Mode Substrate Integrated Waveguide 180° 3-Db Directional Couplers

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

Design and optimization of a 2x2 half-wave optical coupler

Design and Analysis of 2×2 Half-Wave Waveguide Couplers

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Multimode 3 Db Coupler Based on Symmetrically Coupled Waveguides for On-Chipbrk Mode Division Multiplexing

High-Performance 2 × 2 Bent Directional Couplers Designed with an Efficient Semi-Inverse Design Method

A Compact Circular Waveguide Directional Coupler for High-Order Mode Vacuum Electronic Devices

A Topological Directional Coupler Fed by Microstrip Line with Configurable Coupling Coefficient

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Compact Multimode 3db Coupler for On-Chip Mode Division Multiplexing

Coupled-line Directional Coupler Based on Composite Right / Left-Handed Coplanar Waveguides