Abstract:Surface organic molecule modification of nanosized alumina particles is an effective way to improve its dispersion in polymer and to enhance the properties of polymer nanocomposites. In the present study,gamma-aminopropyl triethoxysilane was used as a surface modification agent to react with the hydroxyl group on the surface of nanosized alumina. The properties of the modified alumina particles were characterized by FT-IR spectra, particle-size analyzer and transmission electron microscope (TEM). The nanocomposites of the epoxy resin filled with nano-sized alumina before and after surface modification were fabricated by physical blending. The mechanical behaviour and heat resistant properties of the composites were investigated. The results showed that the effective chemical bonds were formed between nano-alumina particles and gamma-aminopropyl triethoxysilane after modification. Compared to the non-modified particles, the modified alumina nanoparticles exhibited a good dispersibility, and distributed uniformly in the epoxy matrix. The epoxy matrix filled with the modified nanoparticles showed a shorter gel time and a higher curing degree. The composites filled with modified nano-alumina revealed the optimum improvement of heat resistance. The composites with 3 wt% weight fraction modified particles had higher thermal decomposing temperature and glass transition temperature, and they were raised by 11 and 10 degrees C relative to that of the neat resin, respectively. The modified alumina nanoparticles had better enhancement effect on epoxy matrix. The ultimate flexural strength and flexural modulus of the composites with 3 wt% modified particles increased by 55 and 77.1%, respectively; the impact strength of the composites containing 5 wt% modified particles increased by 24.7% relative to the neat resin, and the impact fracture surface presented ductile fracture features. (C) Koninklijke Brill NV, Leiden, 2011

Studies of surface functional modification of nanosized α-alumina

Surface Functional Modification of Nanosized α-Alumina and Its Characterisation

Surface Modification of Nanosized Alumina Hydrate

Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites

Functionalization of the Fine Al2O3 Abrasive by the Polyacrylamide Deposition

A General Procedure for Surface Modification of Nano-Alumina and Its Application to Dendrimers

Synthesis and characterization of the nano alumina-filled tetraglycidyl-4, 4′-diaminodiphenylmethane epoxy resin

Study of surface modification of nano-SiO2 with macromolecular coupling agent (LMPB-g-MAH)

Graft Polymerization of Vinyl Monomers Onto Nanosized Alumina Particles

Competition of Hydrolysis, Self-Polymerization and Graft Coupling for N-Dodecyltrimethoxysilane Modified Al2O3 under Non-Catalytic Conditions

[XPS Investigation on the Modified Nano-Al2o3 by Surface Grafting].

Surface modification of nano-aluminum oxide and it's effection on the abradability of the coating of aqueous polyurethane

Study on the Interfacial Interaction Between Γ-(Trimethoxysilyl) Propyl Methacrylate and Nano-Apatite

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

Preparation of dense modified nanosilica superhydrophilic coatings on aluminum alloy surfaces by adjusting amino groups

Preparation and characterization of Al 2 O 3 composite abrasive

Surface functionalization of Si3N4 nanoparticles by graft polymerization of glycidyl methacrylate and styrene

Study on the Surface Modification of Ultra-fine AlN Powders

The Study on Surface Modification of Nano-Size Si3 N4

Surface Modification and Characterization of Magnesium Hydroxide Sulfate Hydrate Nanowhiskers

Dispersion behavior of zirconia nanocrystals and their surface functionalization with vinyl group-containing ligands.