Abstract:Recent experiments have demonstrated the fabrication of nickel nanolaminated structures with low-angle grain boundaries and that these nanolaminated structures exhibit an ultrahigh hardness of 6.4 GPa and excellent thermal stability. However, the detailed microstructure of the low-angle grain boundary in these nanolaminated structures and plastic deformation mechanisms underlying their ultrahigh hardness have remained elusive to date. Thus, we performed a series of large-scale atomistic simulations to explore the microstructures, thermal stability and energies of the low-angle grain boundary in nanolaminated nickel and to further mimic the plastic deformation of nanolaminated nanopillars. First, we examined the thermal stability of low-angle grain boundaries in nanolaminated structures with three typical textures observed in previous experiments, and we found that the {111}<110>-textured nanolaminated structure is the most stable and has a critical temperature of approximately 750 K for stability. The low-angle grain boundary in such nanolaminated structures consists of a periodic arrangement of three types of dislocations with Burgers vectors of 1/2[101], 1/3[11¯1] and 1/6[14¯1]. Our simulations also showed that the grain boundary energy of the low-angle grain boundary with misorientation of 5° is approximately 0.70 J/m2 and that the interaction energy between two low-angle grain boundaries follows a power law as the lamellar thickness, with an exponent of −1.14. We further simulated the uniaxial compression and tension of nanolaminated nanopillars with a texture of {111}<110> and different lamellar thicknesses. The simulation results showed that as the lamellar thickness decreases, both compressive and tensile yield stresses significantly decrease, while their flow stresses slightly increase. The size effect on yield stress is attributed to dislocation escape from the low-angle grain boundary due to some typical reactions of constituent dislocations, while the size effect on flow stress is related to a complex reaction and interaction of high-density dislocations. Our study provides a fundamental understanding of the grain boundary structure and plastic deformation in textured nanolaminated metals, which offers insights for the design of stronger nanolaminated structures.

Scale Dependent Plastic Deformation of Nanomultilayers with Competitive Effects of Interphase Boundary and Grain Boundary

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

EFFECT OF COMPETITIVE DEFORMATION BETWEEN GRAIN BOUNDARY AND FILM INTERFACE ON HARDNESS MEASUREMENTS OF MULTILAYER FILMS

Length-scale-dependent Deformation and Fracture Behavior of Cu/X (x=nb, Zr) Multilayers: the Constraining Effects of the Ductile Phase on the Brittle Phase

Size-Dependent Deformation Mechanisms and Strain-Rate Sensitivity in Nanostructured Cu/X (X = Cr, Zr) Multilayer Films

Characterization of Hall-Petch Relation on Microstructural Parameter of Softer Sublayer and the Hardness in Nanomultilayers

The Hardness and Related Deformation Mechanisms in Nanoscale Crystalline–amorphous Multilayers

Layer Thickness-Dependent Hardness and Strain Rate Sensitivity of Cu–Al/Al Nanostructured Multilayers

Probing The Size- And Constituent-Mediated Mechanical Properties And Deformation Behavior In Crystalline/Amorphous Nanolaminates

A Nanoindentation Study of the Deformation Mode for Nanostructured Ductile/brittle Multilayers: Cracking Versus Shear Banding

Tailoring Nanostructured Cu/Cr Multilayer Films with Enhanced Hardness and Tunable Modulus

Length Scale Dependent Mechanical/Electrical Properties of Cu/X (x=cr, Nb) Nanostructured Metallic Multilayers

Low-angle Grain Boundary Structures and Size Effects of Nickel Nanolaminated Structures

Strain Rate Dependent Shear Banding Deformation in Al/W Nanomultilayers

Length scale dependent plasticity of amorphous/amorphous NiNb/ZrCuNiALSI nanolaminates

Deformation Mechanisms Dominated by Decomposition of an Interfacial Misfit Dislocation Network in Ni/Ni3Al Multilayer Structures

Effect of modulation wavelength in Cu/Ni multilayers on mechanical properties

Shear strain gradient in Cu/Nb nanolaminates: Strain accommodation and chemical mixing

Mechanical properties and strengthening mechanism of Ni/Al nanolaminates: role of dislocation strengthening and constraint in soft layers

A New Deformation Mechanism of Amorphous/amorphous Laminates at Deep Nanoscale

Strain Rate Sensitivity and Related Plastic Deformation Mechanism Transition in Nanoscale Ag/W Multilayers