Abstract:The membrane extraction of copper ions was carried out using hydrophobic poly(propylene) (PP) hollow fiber membrane modules and kerosene solutions containing organic extractant. The influences of different extractant on the extraction yield, mass transfer performance and mass transfer mechanism were studied. Compared with 2-ethylhexyl phosphoric acid (2EHPA) and 2-methyl-5-sulpho benzaldoxime (2M5SB), di-(2-ethylhexyl)phosphoric acid (D2EHPA) extractant system with high distribution coefficient exhibited higher extraction yield of 99.7%. The extraction equilibrium time, the final extraction yield and the total mass transfer coefficient were independent of the flow rates of two phases. The extraction equilibrium time and the final extraction yield at different flow rates of two phases were 80 min and near 99.5%, respectively. A mass transfer model of a complexation reaction describing the overall mass transfer resistance was controlled by interfacial reactions rather than the aqueous and organic boundary layer which could explain the effect of flow rate on the final extraction yield and the total mass transfer coefficient. This model showed that the mass transfer resistance and mass transfer coefficient were independent Of Cu2+ when copper ion concentration was more than 0.06 g/L. However, when copper concentration was less than 0.06 g/l, the mass transfer resistance increased as Cu2+ concentration decreased, and the mass transfer coefficient decreased as Cu2+ concentration decreased. Extractant entrainment in the aqueous phase and membrane fouling were investigated primarily. It was found that the solvent entrainment could reduce to 10ppm much lower than 200ppm of the classic liquid-liquid extraction, and that the cleaning of contaminated membranes was not complete. However, it can be still concluded from this research that the membrane extraction in PP hollow fibre with D2EHPA extractant would be an effective and promising processing means for Cu2+ separation from aqueous solution. Copyright (c) 2005 John Wiley & Sons, Ltd.

Development of a Novel Hollow Fiber Cation-Exchange Membrane from Bromomethylated Poly(2,6-dimethyl-1,4-phenylene oxide) for Removal of Heavy-Metal Ions

Positively Charged PVC Ultrafiltration Membrane Via Micellar Enhanced Ultrafiltration for Removing Trace Heavy Metal Cations

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

A Positively Charged Tight UF Membrane and Its Properties for Removing Trace Metal Cations Via Electrostatic Repulsion Mechanism.

Ion-exchangeable and sorptive reinforced membranes for efficient electrochemical removal of heavy metal ions in wastewater

Fabrication of Dual-Functional Bacterial-Cellulose-Based Composite Anion Exchange Membranes with High Dimensional Stability and Ionic Conductivity.

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

Robust cellulose-based composite adsorption membrane for heavy metal removal

Chelating polymer modified P84 nanofiltration (NF) hollow fiber membranes for high efficient heavy metal removal

A high absorbent PVDF composite membrane based on β-cyclodextrin and ZIF-8 for rapid removing of heavy metal ions

Enhanced and Efficient Removal of Heavy Metals by Amino-Decorated Membranes in Coordination with Multi-Function

Novel Hollow‐fiber Anion‐exchange Hybrid Membranes: Preparation and Characterization

Exfoliated MXene/poly-melamine-formaldehyde composite membranes for removal of heavy metals and organics from aqueous solutions

Preparation of Copper Ion Adsorbed Modified Montmorillonite/Cellulose Acetate Porous Composite Fiber Membrane by Centrifugal Spinning

A novel trimesoyl chloride/hyper branched polyethyleneimine/MOF (MIL-303)/P84 co-polyimide nanocomposite mixed matrix membranes with an ultra-thin surface cross linking layer for removing toxic heavy metal ions from wastewater

Polyamidoamine Dendronized Hollow Fiber Membranes in the Recovery of Heavy Metal Ions.

Nanofiltration membrane with surface nanostructure induced by interfacial modification for heavy metal ions removal, salt selection and antibacterial

Preparation of a Novel Hollow-Fiber Anion-Exchange Membrane and Its Preliminary Performance in Diffusion Dialysis

Combinational strategy of chemical graft and layer-by-layer assembly of novel nanocomposite membranes fabrication for heavy metal ion capture

Polyacid functionalized cellulose nanofiber membranes for removal of heavy metals from impaired waters

TAP/GMA@CN Metal-Chelating Membrane for Enhanced and Efficient Capture of Cu(II)