Abstract:The increasing demand for hydroxyapatite (HA) coatings with enhanced functionality have led to novel materials with compositions that are more closely resembling those of natural bone apatites. In the present study, selenium-substituted (Se-HA) powders with various Se quantities were prepared by chemical precipitation. By applying suspension plasma spray (SPS), the surface of Ti substrates was coated with corresponding Se-HA coatings. The microstructural and physicochemical properties of the powders and the coatings were studied. Analysis by x-ray diffraction indicates that SeO32- replaced the PO43- groups, affecting the crystal structure and crystallinity of HA. As the extent of Se substitution increases, the lattice volume expands and the crystallinity decreases. The synthesized Se-HA powders were confirmed to be calcium-deficient apatite through energy-dispersive x-ray spectroscopy. However, the high temperature of SPS accelerated volatilization of P, increasing the Ca/(P + Se) ratio of the coatings, whereas the chemical valence state of Se remained unchanged. The Se-HA coating exhibited a high bonding strength of >33 MPa, fully meeting the requirement of 15 MPa as coating implant materials. Dissolution behavior tests indicate that the Se-HA coatings had high solubility in comparison to the HA coating. As the substitution degree of Se increased, the dissolution rate also increased, which greatly enhanced the capacity to generate a bone-like apatite layer. In vitro cell experiments indicate that the Se-HA coatings exhibited excellent biocompatibility, and facilitated adhesion and proliferation of osteoblast MC3T3-E1, even in the presence of fluorine. Furthermore, antibacterial properties of Se-HA coatings were also indicated by inhibition of Staphylococcus aureus, which is the main cause of most infections after orthopedic surgeries. Thus, the Se-HA coatings have potential as implant coating materials for orthopedic applications.

Preparation and Characterization of Silicon-Substituted Hydroxyapatite Coating by a Biomimetic Process on Titanium Substrate

Synthesis and Charaterization of Silicon-Substituted Hydroxyapatite Coating by Electrochemical Deposition on Ti Substrate

Synthesized Silicon-Substituted Hydroxyapatite Coating on Titanium Substrate by Electrochemical Deposition

A Novel Method to Synthesize Hydroxyapatite Coating with Hierarchical Structure

[Experimental Study of Fast Formation of Biomimetic Apatite Coatings on Pure Titanium Surface].

Design and in Vitro Evaluation of Simvastatin-Hydroxyapatite Coatings by an Electrochemical Process on Titanium Surfaces

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

A Novel Ordered Nano Hydroxyapatite Coating Electrochemically Deposited on Titanium Substrate

Nanostructured Si, Mg, CO 3 2− Substituted Hydroxyapatite Coatings Deposited by Liquid Precursor Plasma Spraying: Synthesis and Characterization

Surface Modification of Titanium by Hydroxyapatite/CaSiO3/Chitosan Porous Bioceramic Coating

Hydroxyapatite Coating on Porous Silicon Substrate Obtained by Precipitation Process

Synthesis and Characterization of Si-substituted Hydroxyapatite Bioactive Coating for SiC-coated Carbon/carbon Composites

Oriented Growth of Hydroxyapatite on (0001) Textured Titanium with Functionalized Self-Assembled Silane Monolayer As Template

Characterization of Hydroxyapatite and Titanium Coatings Sputtered on Ti-6Al-4V Substrate.

Preparation and Characterization of TiO2/silicate Hierarchical Coating on Titanium Surface for Biomedical Applications.

Structure and in Vitro Bioactivity of Si Enriched Hydroxyapatite/TiO2 Coatings on Pure Titanium by Micro-Arc Oxidation

Synthesis And Characterization Of Sol-Gel Hydroxyapatite Coatings Deposited On Porous Niti Alloys

Preparation of an Electrodeposited Hydroxyapatite Coating on Titanium Substrate Suitable for In-Vivo Applications

Hydroxyapatite Coating On Ti6a14v Alloy Using A Sol-Gel Derived Precursor

Fabrication, Characterization, and in Vitro Studies of Selenium-substituted Hydroxyapatite Coatings