Abstract:Temperature monitoring is an essential task in cryogenic engineering to ensure the safety of equipment, where highly sensitive and reliable sensors are required to provide real-time and accurate information about temperature. Titanium (Ti)–copper (Cu)-coated fiber Bragg grating (FBG) temperature sensors with a gradient of material properties to minimize thermal stresses are hence fabricated by a combination of Ti/Cu magnetron sputtering and Cu electroplating. The thermal characteristics and thermal fatigue behavior of the sensors are investigated. The sensors exhibit significantly higher sensitivity than that of the bare FBGs at cryogenic temperatures down to 79 K, with good repeatability and stability. Their response to the temperature changes can be precisely described by a quadratic-polynomial equation. No obvious variations in the zero-point, the reflection spectrum, and the temperature sensitivity of the sensors exposed to thermal fatigue from 77 K to room temperature are observed before fatigue failure which could be attributed to the formation and growth of subcritical cracks within the fiber rather than that of fatigue cracks within the metallic coatings, as a result of the cyclic thermal stresses induced by the large differences in coefficient of thermal expansion between the silica optical fiber and the metallic coating materials. The results demonstrate that the multilayer metal-coated FBG sensors provide great potential for temperature measurements or temperature compensation in cryogenic engineering by proper selection of metallic coatings with a gradient of material properties.

Strain Dependence of Fiber Bragg Grating Sensors at Low Temperature

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Experimental Study on Cross-sensitivity of Temperature and Strain of Fiber Optic Bragg Gratings

Strain Response of FBG at Liquid Nitrogen Temperature

Development of Strain Measurement in Superconducting Magnet Through Fiber Bragg Grating

Temperature Insensitive Strain Sensors Based on High Birefringence Fiber Loop Mirror with a Single Fiber Bragg Grating

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Study on Temperature Characteristics of Optical Fiber Bragg Grating under the 77 K Environment

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Fiber Bragg grating temperature sensor for marine application

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Temperature And Strain Dual-Parameter Heterogeneous Fiber Bragg Grating Sensor Made By Femtosecond Laser

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

The Research on temperature sensitivity of fiber bragg grating based on stress analysis

Temperature Compensation in Strain Measurement Using Erbium-doped Fluorescent Fiber Gratings

Development of Highly-Sensitive and Reliable Fiber Bragg Grating Temperature Sensors With Gradient Metallic Coatings for Cryogenic Temperature Applications

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity