Operating modes study of evaporative cooling-dehumidification air conditioning under different climatic conditions
Guanchao Lv,Xu Ji,Bianfeng Yang,Yingxu Chen,Haiyang Xu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122597
IF: 6.4
2024-04-01
Applied Thermal Engineering
Abstract:According to the temperature and humidity characteristics of different climates, this paper proposes a variety of operating modes of evaporative cooling-dehumidification air conditioning by different combinations of direct evaporative cooling (DEC), indirect evaporative cooling (IEC) and desiccant dehumidification (DDE). Appropriate temperature and humidity range is suggested for every operating mode. In low-humidity climates with temperatures of 28–32.7 °C, indirect evaporative cooling is employed for only temperature reduction. In low-humidity climates with temperatures of 32.7–40 °C, direct evaporative cooling is carried out firstly, followed by desiccant dehumidification. In moderate-humid climates with temperatures of 34.23–40 °C, direct evaporative cooling is carried out firstly to reduce the temperature to approximately 30 °C, followed by desiccant dehumidification, and finally indirect evaporative cooling. For high-humidity climates, desiccant dehumidification is firstly employed, then multiple-stage cooling can be employed based on the cooling requirement. The performance of these operating modes matching with moderate-temperature and high-humidity climates, high-temperature and low-humidity climates, and high-temperature and high-humidity climates respectively are demonstrated experimentally. In moderate-temperature and high-humidity climates, the system outlet air temperature is 23–26 °C and the relative humidity is 42.5–57.2%. In high-temperature and low-humidity climates and high-temperature and high-humidity climates, the effects of ambient temperature and humidity on the cooling efficiency (η), cooling capacity (Qc), and Coefficient of Performance (COP) were explored, and their maximum values are 0.914, 5156.4 W, and 14.8; 8.15, 4158.8 W, and 11.96, respectively.
energy & fuels,engineering, mechanical,thermodynamics,mechanics