Abstract:A gas inlet channel is established to model the inflow of the inert gas (95% Ar) and dopant gas (5% N2), and a gas outlet channel to model the outflow of the gas species. The joint that allows exchanges of the gas species is modeled as a thin porous graphite sheet to simulate the mass transfer between the inside and outside of the growth chamber. The fluid flow velocity field inside and outside the crucible is calculated inside and outside the crucible under several experimental conditions. Although the exchange of the atmosphere control gas occurs only at the joint, the N2 can still rapidly diffuse to the crystal surface. Single‐crystal silicon carbide (SiC) is an important semiconductor material for the fabrication of power and radio frequency (RF) devices. The major technique for growing single‐crystal SiC is the so‐called physical vapor transport (PVT) method, in which not only the thermal field but also the fluid‐flow field and the distribution of gas species can be hardly measured directly. In this study, a multi‐component flow model is proposed that includes the inside and outside of a growth chamber and a joint between the seed crystal holder and crucible which allows exchanges of the gas species. The joint is simulated as a thin porous graphite sheet. The Hertz‐Knudsen equation is used to describe the sublimation and deposition. The convection and diffusion are described by the Navier–Stokes equations and mixture‐averaged diffusion model, in which the Stefan flow is taken into account. The numerical simulations are conducted by the finite element method (FEM) with a multi‐physics coupled model, which is able to predict the fluid flow field, species distribution field, crystal growth rate, and evolution of the molar concentration of dopant gas. Using this model, the effects of several experimental conditions on the transport of gas species and the growth rate of single‐crystal SiC are analyzed.

Numerical simulation for fabrication of C/SiC composites in isothermal CVI reactor

Numerical simulation of effects of reactor dimensions on isothermal CVI process of C/SiC composites

Modeling The Effects Of Reactor Inlet Configuration On Isothermal Cvi Process Of C/Sic Composites

Modeling for the Fabrication Process of a φ1185 mm C/C Composite Thermal Insulation Tube in an Isothermal Chemical Vapor Infiltration Reactor

Processing of C<i><sub>f</sub></i>/SiC Composites through Two-Channel Temperature-Control CVI: I, Modeling

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

Numerical Analysis of Particulate Migration Behavior Within Molten Pool During TIG-Assisted Droplet Deposition Manufacturing of SiC Particle-Reinforced Aluminum Matrix Composites.

Numerical mapping relationship between process parameters and mechanical properties of unidirectional carbon/carbon composites

Numerical Simulation of a Novel Method for PVT Growth of SiC by Adding a Graphite Block

Numerical Simulation of Casting Filling Process of Composites Reinforced with Nano SiC Based on Smoothed Particle Hydrodynamics

Improved densification of SiC f /SiC composites by microwave-assisted chemical vapor infiltration process based on multifrequency solid-state sources excitation

Design of domain-limited CVI reactor for L-shaped C/C structure

Simulation of Heat Transfer in a Vertical Tubular CVD Reactor

Modeling of Chemical Vapor Infiltration Using Boundary Singularity Method

Numerical Simulation of Squeeze-Casting SiC3D/Al Ceramic Matrix Composites

Simulation of temperature profile and design of heat transfer structure for reactor of film growth on Si-wafer

Simulation of densification process of W-Cu system during liquid-phase sintering

Numerical Simulation of the Transport of Gas Species in the PVT Growth of Single‐Crystal SiC

Probabilistic physics-integrated neural differentiable modeling for isothermal chemical vapor infiltration process

Sandwich-structured C/C-SiC Composites Fabricated by Electromagnetic-Coupling Chemical Vapor Infiltration

T-S Fuzzy System for Isothermal CVI Process of C/C Composites