Abstract:Sintering is a process of bonding between solid particles which typically occurs under high temperature. Currently, simulation of sintering process is mainly concentrated on the single-phase polycrystalline materials. As there are a lot of materials which are biphasic porous system, it is of practical significance to simulate the microstructural evolution of biphasic porous system during sintering process. In this work, a new phase field model is established to simulate sintering process in biphasic porous system. The evolution of the component is governed by Cahn-Hilliard equation, while the orientation field by the time-dependent Allen-Cahn equation. A function is established to describe the relationship between atomic diffusion coefficient and grain boundary diffusion, surface diffusion and volume diffusion. A group of phenomenological coefficients are obtained by analyzing the characteristic of the phase-field model. The simulation results show that the new phase-field model can effectively simulate the sintering process in biphasic porous system. The formation and growth of sintering neck, the seal spheroidization and disappearance of pores as well as the mergence and growth of grains are observed during simulation. The sintering necks between the parent phase and the second phase grow very fast at the early stage of simulation, while at the late stage, because of the pinning effect, the growth rate of the sintering neck slows down obviously, pores become isolated by the grains, and its shape change from concave to convex, the relative small pores are eliminated, which leads to densification. As the sintering proceeds, the grain size of the second phase gradually decreases and the parent-phase grains are wrapped by the second-phase grains. Because of the pinning effect of the second phase, the migration rate of the grain boundary of the parent phase is restrained. The evolution course of pores depends largely on the interaction between the second phase and the pores. The evolution rate of pores is quantitatively compared between the biphasic porous system and the single-phase system. In the case of biphasic porous system, the evolution rate of pores is slower than that in single-phase system. The simulating growth exponents of the parent phase are calculated with different volume fractions of the second phase. As the volume fractions of the second phase increase from 15% to 25%, the grain growth exponent changes from 2.9 to 3.4.

Simulation of densification process of W-Cu system during liquid-phase sintering

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Modeling morphology evolution and densification during solid-state sintering via kinetic Monte Carlo simulation

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Thermodynamic Consistent Phase Field Model for Sintering Process with Multiphase Powders

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

Numerical Simulation of Casting Filling Process of Composites Reinforced with Nano SiC Based on Smoothed Particle Hydrodynamics

A model for the sintering of spherical particles of different sizes by solid state diffusion

Phase-field Simulation of Sintering Process of Ceramic Composite Fuel

Numerical simulation of effects of reactor dimensions on isothermal CVI process of C/SiC composites

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

Mesoscopic Simulations of Powder Bed Fusion: Research Progresses and Conditions

Establishment of constitutive models and numerical simulation of dry pressing and solid state sintering processes of MgTiO3 ceramic

A compressible semi-resolved computational fluid dynamics-discrete element method coupling model for fluid–solid systems with heat transfer

Porous media model with multiphase transport and solid mechanics bidirectional coupling for SiO 2 soot preform sintering process

Phase field simulation of sintering process in biphasic porous material

Sintering process and particles migration mechanism of rapid sintering of W–Cu composites

Investigating the Microscopic Mechanism of Ultrasonic-Vibration-Assisted-Pressing of WC-Co Powder by Simulation

An Improved Mathematical Model to Simulate Mold Filling Process in High Pressure Die Casting Using CLSVOF Method and CSF Model

Microstructure evolution and densification behavior of TiC/316L composite powders during cold/warm die compaction and solid-state sintering: 3D particulate scale numerical modelling and experimental validation

A Phase-Field-Micromechanics Study on the Microstructural Evolution during Viscous Sintering