Abstract:Boundary Singularity Method (BSM) was used to model Chemical Vapor Infiltration (CVI) in a fibrous preform. Straight, long fibers of varying cross-sectional geometry, representing fibers of a preform, were placed within a domain of a pre-determined size. The preparation of dense fiber-reinforced Silicon-Carbon (SiC) composites was considered as a representative of CVI methodology, where methyl-trichlorosilane (MTS) was used as both the silicon and carbon donor for the silicon carbide matrix. Concentrations of MTS were then set at the domain boundaries, and the domain was gradually infiltrated with MTS as time progressed. The concentration of MTS at the surface of the preform fibers was calculated using the adopted BSM. For quasi-equilibrium considered, the reaction rate at solid surface is equal to the diffusion rate towards the surface. The Robin or third type boundary condition, which is a linear combination of the values of a function and the values of its derivative on the boundary of the domain, are developed and implemented to BSM. From the fibers surface concentrations obtained by BSM, deposition rates were calculated, and the geometry was updated to reflect the fiber growth during the time step, therefore, the fiber size growth and pore filling was modeled over time. The BSM analysis was verified by comparisons to a known analytical solution of concentric cylinders with a concentration set at the outer cylinder and a reaction at the inner. BSM solutions were also compared to experimental data as well as computational results obtained by a Level-Set Method (LSM). Obtained dynamics of pore size and location will help to evaluate quality of material manufactured by CVI. Porosity transients were obtained to show the relation between initial and current porosities as time progresses.

Modeling The Effects Of Reactor Inlet Configuration On Isothermal Cvi Process Of C/Sic Composites

Numerical simulation of effects of reactor dimensions on isothermal CVI process of C/SiC composites

Modeling for the Fabrication Process of a φ1185 mm C/C Composite Thermal Insulation Tube in an Isothermal Chemical Vapor Infiltration Reactor

Design of domain-limited CVI reactor for L-shaped C/C structure

Processing of C<i><sub>f</sub></i>/SiC Composites through Two-Channel Temperature-Control CVI: I, Modeling

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

T-S Fuzzy System for Isothermal CVI Process of C/C Composites

The Effect of Molten Salt Infiltration on 2D SiCf/SiC Composite by Chemical Vapour Infiltration

Improved densification of SiC f /SiC composites by microwave-assisted chemical vapor infiltration process based on multifrequency solid-state sources excitation

Multi-physics coupling numerical simulation of variable porosity in reactive melt infiltration process

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

Modeling of Chemical Vapor Infiltration Using Boundary Singularity Method

Effects of interphases on thermal expansion of 3D-C/SIC composites

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

Probabilistic physics-integrated neural differentiable modeling for isothermal chemical vapor infiltration process

FUZZY SYSTEM MODEL FOR ISOTHERMAL CHEMICAL VAPOR INFILTRATION PROCESS OF CARBON/CARBON COMPOSITES

Numerical mapping relationship between process parameters and mechanical properties of unidirectional carbon/carbon composites

Binder jetting additive manufacturing of hierarchical structural SiC w /SiC composites

Sandwich-structured C/C-SiC Composites Fabricated by Electromagnetic-Coupling Chemical Vapor Infiltration

Numerical evaluation of effective elastic properties of CVI-C/C composites considering anisotropic matrix

Modeling of filling and solidification process for TiAl exhaust valves during suction casting