Deprotection of T-Butyldimethylsiloxy (tbdms) Protecting Group with Catalytic Copper (ii) Chloride Dihydrate

ZP Tan,L Wang,JB Wang

IF: 9.1

2000-01-01

Chinese Chemical Letters

Abstract:t-Butyldimethylsilyl (TBDMS) ether can be cleaved upon refluxing in acetone/H2O (95 : 5) in the presence of a catalytic amount of copper (II) chloride dihydrate (5 mmol %).

What problem does this paper attempt to address?

Copper(II) Chloride Dihydrate: A Catalytic Agent for the Deprotection of Tetrahydropyranyl Ethers (THP Ethers) and 1-Ethoxyethyl Ethers (EE Ethers)

JB Wang,C Zhang,ZH Qu,YH Hou,B Chen,P Wu

DOI: https://doi.org/10.1039/a900262f

1999-01-01

Journal of Chemical Research

Abstract:Tetrahydropyranyl ethers (THP groups) and 1-ethoxyethyl ethers (EE groups) are removed upon refluxing in 95% EtOH or Me2CO–H2O (95:5) in the presence of a catalytic amount of copper(II) chloride dihydrate (2–5 mol%).
Tandem Micellar Catalysis and Cloud Point Extraction Process for C-S Coupling Reaction in Water

Xin Ge,Weili Song,Xinzhi Chen,Chao Qian,Shaodong Zhou,Xuemin Liu

DOI: https://doi.org/10.1016/j.colsurfa.2021.126263

IF: 5.518

2021-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:A tandem process of micellar catalysis and cloud point extraction (CPE) is developed for copper-catalyzed Ullmann C-S coupling reactions in water. The functional nonionic surfactant, amine terminated polyether M2070, affords nano-micelle environment in the aqueous system; the latter splits to two phases above the cloud point temperature (CPT). The nature of the micellar catalysis in M2070 aqueous was investigated by DLS, EDS, XPS, IR, TEM and 1H NMR. M2070 was verified to provide nano-space for encapsulation and aggregation of the substrates. More importantly, the metallic micelle formed by M2070 chelating copper was identified. It is noteworthy that excellent productivity in pre-micellar catalysis of C-S coupling reactions was obtained with good tolerance of substrate. Finally, the water-micelle system was separated into two phases above the CPT thus to achieve the product separation. Furthermore, the M2070/water system can be recycled and reused.
Catalytic Removal of tert-Butyldimethylsilyl (TBS) ether by PVP-I

Guangying Lu,Di Wang,Jiangmeng Ren,Yanxiong Ke,Bu-Bing Zeng

DOI: https://doi.org/10.1016/j.tetlet.2019.05.059

IF: 2.032

2019-01-01

Tetrahedron Letters

Abstract:•A PVP-I catalyzed OTBS deprotection method was developed with simple work-up process.•OTBS and OTHP could be removed simultaneously.•Chemoselective deprotection of TBS ethers in the presence of TIPS and TBDPS.
A Mild, Efficient and Selective Deprotection of T‐butyldimethylsilyl‐protected Phenols Using Cesium Carbonate.

Zhi‐Yong Jiang,Yan‐Guang Wang

DOI: https://doi.org/10.1002/chin.200332044

2003-01-01

ChemInform

Abstract:AbstractFor Abstract see ChemInform Abstract in Full Text.
A Mild, Efficient and Selective Cleavage of Aryl Tert-Butyldimethysilyl Ethers Using Koh in Ethanol

ZY Jiang,YG Wang

DOI: https://doi.org/10.1246/cl.2003.568

2003-01-01

Chemistry Letters

Abstract:An efficient and selective method for the deprotection of aryl tert-butyldimethysilyl (TBS) ethers is described. The protecting group TBS could be cleaved from aryl silyl ethers in the prensence of alkyl TBS ethers using KOH in ethanol at room temperature to give the corresponding phenols in excellent yields (87-99%).
Cucl-Catalyzed Cleavage of S-Triphenylmethyl Thioether: A New Detritylation Method for Thio Group

Ming Ma,Xiu Zhang,Lingling Peng,Jianbo Wang

DOI: https://doi.org/10.1016/j.tetlet.2006.12.090

IF: 2.032

2006-01-01

Tetrahedron Letters

Abstract:A new method for the deprotection of trityl thioethers using CuCl as the catalyst under ultrasonic conditions is described.
An Efficient and Recyclable Catalyst for the Cleavage of Tert-Butyldiphenylsilyl Ethers.

Shiqiang Yan,Ning Ding,Wei Zhang,Peng Wang,Yingxia Li,Ming Li

DOI: https://doi.org/10.1016/j.carres.2012.02.021

IF: 2.975

2012-01-01

Carbohydrate Research

Abstract:An efficient, chemoselective, and environment-friendly method for the deprotection of tert-butyldiphenylsilyl ethers mediated by triflic acid supported on silica gel is reported. A wide range of tert-butyldiphenylsilyl ethers derived from carbohydrate and saponin residues can be smoothly cleaved in the presence of various types of other protecting groups in good to excellent yields in acetonitrile. This heterogeneous reaction does not require aqueous workup, and the supported catalyst can be readily recycled.
Diiodine–Triethylsilane System: A Practical Method for Deprotection of Aryl Benzyl Ethers

Jin Jiang,Zhuo Wang

DOI: https://doi.org/10.1055/a-2414-7887

2024-10-03

Synlett

Abstract:A practical method for the debenzylation of aryl benzyl ethers has been developed using easy-to-operate I 2 and Et 3 SiH, as well as the green solvent ethyl acetate. Halo, methoxy, ester, and nitro groups on the benzene ring of the aryl benzyl ether are compatible with this debenzylation. Control experiments revealed that Et 3 SiI, generated in situ, might be the actual promoter of the procedure. This method does not require a separate desilylation reaction to obtain phenol products. Received: 03 August 2024 Accepted after revision: 13 September 2024 Accepted Manuscript online: 13 September 2024 Article published online: 02 October 2024 © 2024. Thieme. All rights reserved Georg Thieme Verlag KG Rüdigerstraße 14, 70469 Stuttgart, Germany

chemistry, organic
1,4-Dithiothreitol mediated cleavage of the acetal and ketal type of diol protecting groups

Yan Liu,Jiuchang Sun,Lei Cai,Yueqi Zhao,Jing Fang,Bo Hu,Penghua Shu,Lingkui Meng,Qian Wan

DOI: https://doi.org/10.1039/c8qo00247a

IF: 5.456

2018-01-01

Organic Chemistry Frontiers

Abstract:The use of 1,4-dithiothreitol (DTT) as an acetal or ketal exchange reagent and camphorsulfonic acid (CSA) as a catalyst permitted the efficient removal of benzylidene acetal and isopropylidene ketal protecting groups under mild conditions. A variety of acetal and ketal protected carbohydrates were deprotected with this method in 78-98% yields. In addition, terminal isopropylidene ketal or benzylidene acetal was selectively cleaved in the presence of internal isopropylidene ketal. Moreover, it was found that an unusual seven-membered 1,3-dithiepane was formed during the deprotection of benzylidene acetal with DTT.
Synthesis of Green Oxane and 1,3-Dioxolanes Catalyzed by Copper p-Toluene Sulfonate

Liu Ling,Zhao Yuechang,Cheng Wenping,Wang Youfei,Yang Jianguo

2008-01-01

Abstract:Green oxane was synthesized from isobutyraldehyde and 2,2,4-trimethyl-1,3-pentanediol(TMPD) catalyzed by different copper salts.Copper p-toluene sulfonate was chosen as most effective catalyst for the reaction.Effects of different solvents,catalyst dosage,mole ratio of aldehyde to diol and reaction time on conversion of TMPD and selectivity to green oxane were investigated.Optimum reaction conditions are:n(isobutyraldehyde)∶n(TMPD) 3∶1,catalyst 0.34 mmol,toluene 10 mL,reaction time 1.5 h and reaction temperature 110 ℃.Under the conditions,conversion of TMPD and selectivity to green oxane is 94.4% and 99.8%,respectively.Copper p-toluene sulfonate catalyst can be reused.After 5 recycles,conversion of TMPD is 90.1% and selectivity to green oxane keeps at 99.2%.Moreover,copper p-toluene sulfonate is a very efficient catalyst in other acetalization and ketalization processes.
A Mild and Efficient Selective Tetrahydropyranylation of Primary Alcohols and Deprotection of Thp Ethers of Phenols and Alcohols Using Pdcl2(Ch3cn)(2) As Catalyst

YG Wang,XX Wu,ZY Jiang

DOI: https://doi.org/10.1016/j.tetlet.2004.02.057

IF: 2.032

2004-01-01

Tetrahedron Letters

Abstract:Primary alcohols were selectively tetrahydropyranylated in good to excellent yields at room temperature using PdCl2(CH3CN)(2) as catalyst in tetrahydrofuran (THF) in the presence of phenols, secondary, and tertiary alcohols. The tetrahydropyranyl (THP) group could be efficiently removed using PdCl2(CH3CN)(2) as catalyst in CH3CN, while other protection groups such as p-toluenesulfonyl (Ts), tert-butyldiphenylsilyl (TBDPS), benzyloxycarbonyl (Cbz), allyl, benzyl (Bn), and benzoyl (Bz) remained intact under these conditions. (C) 2004 Elsevier Ltd. All rights reserved.
Tetrabutylammonium Peroxydisulfate in Organic Synthsis; II. A Mild Method for Cleaving Tosylhydrazones with Tetrabutylammonium Peroxydisulfate

Fener Chen,Jianshe Yang,Heng Zhang,Chunsheng Guan,Jiangling Wan

DOI: https://doi.org/10.1080/00397919508015467

1995-01-01

Synthetic Communications

Abstract:Tosylhydrazones are oxidized with tetrabutylammonium peroxydisulfate in 1, 2-dichloroethane to afford the corresponding ketones in excellent yields under neutral conditions.
ChemInform Abstract: TMDS As a Dual‐Purpose Reductant in the Regioselective Ring Cleavage of Hexopyranosyl Acetals to Ethers.

Yinjie Zhang,Wissam Dayoub,Guorong Chen,Marc Lemaire

DOI: https://doi.org/10.1002/chin.201235215

2012-01-01

ChemInform

Abstract:4,6‐O‐Benzylidene or alkylidene glycosyl acetals can be cleaved at the O4‐ or O6‐position under optimized conditions using TMDS and either copper triflate as catalyst or a stoichiometric amount of AlCl 3 .
Copper(II) Triflate-Catalyzed Reduction of Carboxylic Acids to Alcohols and Reductive Etherification of Carbonyl Compounds

Yinjie Zhang,Wissam Dayoub,Guorong Chen,Marc Lemaire

DOI: https://doi.org/10.1016/j.tet.2012.06.080

IF: 2.388

2012-01-01

Tetrahedron

Abstract:A protocol is described for the reduction of carboxylic acids to primary alcohols using 1,1,3,3-tetramethyldisiloxane (TMDS) and a catalytic amount of Cu(OTf)2. Aliphatic as well as aromatic carboxylic acids are reduced in high selectivity and good yields. TMDS/Cu(OTf)2 has also been found to be an efficient catalytic reducing system for the preparation of symmetrical ethers from carbonyl compounds under mild conditions.
A mild Deprotection of Isopropylidene Ketals from 2-Deoxyglycosides Using AcOH/H 2 O/DME: An Efficient Regioselective Deprotection of Terminal Isopropylidene Ketals

Xin-Gang Ding,Jia Zheng,Xian-Rong Cai,Jian Su,Qiang Wang,Ying-Wei Wang,Xiao-Nan Liu,Xing-Yong Liang

DOI: https://doi.org/10.1016/j.carres.2024.109167

IF: 2.975

2024-05-30

Carbohydrate Research

Abstract:This paper describes a mild and efficient catalytic deprotection method for isopropylidene ketals and benzylidene acetals using AcOH/H 2 O/DME(1,2-Dimethoxyethane). The method effectively removes ketal and acetal protecting groups from 2-deoxyglycosides which are prone to hydrolysis under acidic conditions. Moreover, it enables the selective removal of the terminal ketal over an internal one.

biochemistry & molecular biology,chemistry, organic, applied
Dmf-Mediated Deprotection of Bulky Silyl Esters under Neutral and Fluoride-Free Conditions

Bo Chen,Hui-Xia Sun,Jian-Feng Qin,Bing Wang

DOI: https://doi.org/10.1016/j.tetlet.2015.11.048

IF: 2.032

2016-01-01

Tetrahedron Letters

Abstract:Bulky TBDPS and TIPS carboxylic esters were efficiently cleaved by a green and mild protocol using only DMF–H2O (20:1) at 70°C. The neutral conditions tolerate various common acid- and base-labile functionalities, including alkyl and aryl silyl ethers.
Tetrabutylammonium Peroxydisulfate in Organic Synthesis; Xi. A Novel and Selective Approach to the Oxidative Deprotection of Allyl Ethers with Tetrabutylammonium Peroxydisulfate

FE Chen,XH Ling,YP He,XH Peng

DOI: https://doi.org/10.1055/s-2002-831343

2001-01-01

Abstract:A tetrabutylammonium peroxydisulfate-mediated oxidative procedure for the mild selective deprotection of allyl ethers to form the corresponding alcohols is described. The alcohols are obtained in yields of 81-85% and the method is compatible with several functional groups under these reaction conditions.
Catalytic Oxidation of Butylated Hydroxytoluene Using Thermally Treated Cobalt-Copper Layered Double Hydroxides: Synthesis, Structural Evolution, and Mechanistic Insights

Jiyu Wang,Naiwang Liu,Li Shi,Xuan Meng

DOI: https://doi.org/10.1016/j.mcat.2024.114484

IF: 4.6

2024-01-01

Molecular Catalysis

Abstract:This study investigates the application of cobalt-copper layered double hydroxides (LDHs) in the oxidation of butylated hydroxytoluene (BHT) and explores their catalytic behavior during thermal treatment. LDHs were synthesized via coprecipitation, and various ratios of Co-Cu hydrotalcite were subjected to thermal treatment. Structural analysis revealed that thermal treatment transforms the LDHs into mixed metal oxides. Among the synthesized catalysts, Co1Cu3-LDHs exhibited superior catalytic activity in the oxidation of BHT. Techniques such as XRD, FT-IR, TGA, N-2 adsorption-desorption, SEM, and XPS were employed to investigate the structural changes and surface properties of the LDHs. The Co1Cu3-LDH catalyst, treated at 250 degrees C, exhibited outstanding catalytic performance, attributed to the synergistic effects between Co and Cu. Upon optimizing the reaction conditions, the conversion of BHT reached 99 %, with a selectivity of 77 % towards 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHT-CHO). The oxidation mechanism involves the oxidation of the pi-electron system on the benzene ring and deep oxidation of the phenolic hydroxyl methyl group, with two potential reaction pathways proposed.
Peculiar and full debromination of tetrabromodiphenyl ether on Pd/TiO2: A competing route through hydro-debromination and coupling-debromination

Ming Lei,Zhiying Wang,Yao Tang,Huimin Wang,Lihua Zhu,Heqing Tang

DOI: https://doi.org/10.1016/j.apcatb.2020.119093

2020-10-01

Abstract:The use of palladium deposited TiO2 (Pd/TiO2) as catalysts yielded complete debromination of 2,2′,4,4′-tetrabromodiphenyl ether (BDE47) in isopropanol solution containing NaOH at 40 °C within 60 min. The final organic products were diphenyl ether and dibenzofuran. It was disclosed that two competing reduction paths (hydro-debromination and coupling-debromination) occurred over Pd nanoparticles. The hydro-debromination was dependent on the participation of active H atom species generated by catalytic transfer hydrogenation on metallic Pd. The coupling-debromination proceeded via the oxidative addition of Pd(0) to <math>Br2C12H8OBr2′</math>, leading to an transition state of <math>Br2PdIIC12H8OBr2′</math>, the reductive dissociation of which resulted in the elimination of Br− ions, producing a new transition state <math>Pd0C12H8OBr2′−</math>. A further oxidative addition of <math>Pd0C12H8OBr2′−</math> generated <math>Br2′PdIIC12H8O−</math>, and its final reductive elimination provided dibenzofuran, leading to the regeneration of Pd(0). The integration of the catalytic coupling and hydrogenation reaction on Pd nanoparticles greatly accelerated the removal of the halogenated organic pollutants.

chemistry, physical,engineering, chemical, environmental
A New Catalyst System V-Cs-Cu-Tl for Selective Oxidation of P-Tert Butyl Toluene to P-Tert Benzaldehyde

M Chen,RX Zhou,XM Zheng

IF: 9.1

2001-01-01

Chinese Chemical Letters

Abstract:In this paper, a new catalysts system V-Cs-Cu-TI was studied in the gas phase selective oxidation for p-tert butyl toluene to p-tert benzaldehyde. The catalyst system was prepared by impregnation method. The results obtained are optimum value and have good advantages in environmental protection.

Deprotection of T-Butyldimethylsiloxy (tbdms) Protecting Group with Catalytic Copper (ii) Chloride Dihydrate

Copper(II) Chloride Dihydrate: A Catalytic Agent for the Deprotection of Tetrahydropyranyl Ethers (THP Ethers) and 1-Ethoxyethyl Ethers (EE Ethers)

Tandem Micellar Catalysis and Cloud Point Extraction Process for C-S Coupling Reaction in Water

Catalytic Removal of tert-Butyldimethylsilyl (TBS) ether by PVP-I

A Mild, Efficient and Selective Deprotection of T‐butyldimethylsilyl‐protected Phenols Using Cesium Carbonate.

A Mild, Efficient and Selective Cleavage of Aryl Tert-Butyldimethysilyl Ethers Using Koh in Ethanol

Cucl-Catalyzed Cleavage of S-Triphenylmethyl Thioether: A New Detritylation Method for Thio Group

An Efficient and Recyclable Catalyst for the Cleavage of Tert-Butyldiphenylsilyl Ethers.

Diiodine–Triethylsilane System: A Practical Method for Deprotection of Aryl Benzyl Ethers

1,4-Dithiothreitol mediated cleavage of the acetal and ketal type of diol protecting groups

Synthesis of Green Oxane and 1,3-Dioxolanes Catalyzed by Copper p-Toluene Sulfonate

A Mild and Efficient Selective Tetrahydropyranylation of Primary Alcohols and Deprotection of Thp Ethers of Phenols and Alcohols Using Pdcl2(Ch3cn)(2) As Catalyst

Tetrabutylammonium Peroxydisulfate in Organic Synthsis; II. A Mild Method for Cleaving Tosylhydrazones with Tetrabutylammonium Peroxydisulfate

ChemInform Abstract: TMDS As a Dual‐Purpose Reductant in the Regioselective Ring Cleavage of Hexopyranosyl Acetals to Ethers.

Copper(II) Triflate-Catalyzed Reduction of Carboxylic Acids to Alcohols and Reductive Etherification of Carbonyl Compounds

A mild Deprotection of Isopropylidene Ketals from 2-Deoxyglycosides Using AcOH/H 2 O/DME: An Efficient Regioselective Deprotection of Terminal Isopropylidene Ketals

Dmf-Mediated Deprotection of Bulky Silyl Esters under Neutral and Fluoride-Free Conditions

Tetrabutylammonium Peroxydisulfate in Organic Synthesis; Xi. A Novel and Selective Approach to the Oxidative Deprotection of Allyl Ethers with Tetrabutylammonium Peroxydisulfate

Catalytic Oxidation of Butylated Hydroxytoluene Using Thermally Treated Cobalt-Copper Layered Double Hydroxides: Synthesis, Structural Evolution, and Mechanistic Insights

Peculiar and full debromination of tetrabromodiphenyl ether on Pd/TiO2: A competing route through hydro-debromination and coupling-debromination

A New Catalyst System V-Cs-Cu-Tl for Selective Oxidation of P-Tert Butyl Toluene to P-Tert Benzaldehyde