The Effect of Thermal Exposure on the Interface and Mechanical Properties of Al(18)B(4)O(33)W/Az91 Magnesium Matrix Composite

MY Zheng,K Wu,A Liang,S Kamado,Y Kojima

DOI: https://doi.org/10.1016/j.msea.2003.09.085

2004-01-01

Abstract:The effect of high temperature exposure on the interface and tensile properties of Al18B4O33w/AZ91 magnesium matrix composite fabricated by squeeze casting was studied. The interfaces of the composites were examined using transmission electron microscopy, and the mechanical properties were evaluated by tensile tests. The interfacial region was composed of MgO which was formed by the reaction between the Al18B4O33 whisker and the Mg matrix. An thin and uniform interfacial reaction layer with a thickness of 10–20nm formed during squeeze casting could act as a barrier to prevent the further reaction between Al18B4O33 whisker and Mg alloys. The interfacial reaction rate was very low during thermal exposure below the liquidus temperature of AZ91 matrix alloy. Only after exposure above the liquidus temperature of the AZ91 matrix alloy for a long period, the thickness of the interfacial layer increased obviously. However, the interfacial reaction rate was much slower than that in the Al18B4O33w/Al–Mg composites. The interfacial reaction kinetics was controlled by the seepage of Mg and release of Al and B along the narrow diffusion channels between the fine MgO particle. The composite did not show a degradation in the tensile properties after exposure below the solidus temperature of AZ91 for long periods, suggesting that the Al18B4O33w/AZ91 magnesium matrix composite could be subjected to long-term service at elevated temperature.