Abstract:In this paper, the tensile mechanical behavior and progressive damage morphology of glass-fiber-reinforced magnesium alloy laminate for different numbers of holes in a temperature range of 25-180 °C were investigated. In addition, based on extensive tensile tests, the tensile mechanical behavior and microscopic damage morphology of porous-glass-fiber-reinforced magnesium alloy laminates at different temperatures were observed by finite element simulation and scanning electron microscopy (SEM). Finally, the numerical simulation and experimental results were in good accordance with the prediction of mechanical properties and fracture damage patterns of the laminates, the average difference between the residual strength values of the specimens at ambient temperature was 5.57%, and the stress-strain curves were in good agreement. The experimental and finite element analysis results showed that the damaged area of the bonded layer tended to expand with the increase in the number of holes, which has a lesser effect on the ultimate tensile strength. As the temperature increased, the specimens changed from obvious fiber breakage (pull-out) and the resin matrix damage mode to matrix softening damage and interfacial delamination fracture damage. As the testing temperature of the specimens increased from 25 °C to 180 °C, the tensile strength of the specimens decreased by an average of 51.59%, while the tensile strength of the specimens showed a nonlinear decreasing trend. The damage mechanism of porous-glass-fiber-reinforced magnesium alloy laminates at different temperatures is discussed in this paper, which can provide a reference for engineering applications and design.

Elevated-temperature properties evaluation of Mg-intermetallic laminated composites

High temperature deformations and microstructural evolutions of Mg alloy laminated composites fabricated by ECAE

Development of Ceramic/mg Lamellar Composites with Superior High-Temperature Mechanical Properties

Experimental and Numerical Investigation of the Tensile and Failure Response of Multiple-Hole-Fiber-Reinforced Magnesium Alloy Laminates under Various Temperature Environments

Mechanical Property of M40J F /5a06al Composite at Elevated Temperatures

Microstructure evolution and tensile behavior of MgAlB4w/Al composites at high temperatures

Microstructures and Mechanical Properties of Extruded Mg-9Gd-4Y-0.6Zr-T5 at Elevated Temperatures

Mechanical properties and failure behavior of AZ61 magnesium alloy at high temperatures

Mechanical Behavior and Failure Mechanism of an As-Extruded Mg-11 Wt％y Alloy at Elevated Temperature

Intermediate-Temperature Tensile Behavior of a Hot-Rolled Mg-Li-Al-Cd-Zn Alloy

Hot Deformation Behavior of Mg2B2O5 Whiskers Reinforced AZ31B Magnesium Composite Fabricated by Stir-Casting

Constitutive Equation and Hot Processing Map of Mg-16Al Magnesium Alloy Bars

The Effect of Thermal Exposure on the Interface and Mechanical Properties of Al(18)B(4)O(33)W/Az91 Magnesium Matrix Composite

Mg–Zn/graphite thermal protection materials: study of mechanical properties at high temperature

Effect of Temperature on the Complex Modulus of Mg-Based Unidirectionally Aligned Carbon Fiber Composites

Forming Limits of Magnesium Alloy AZ31B Sheet at Elevated Temperatures

Varying strain rates and elevated temperatures effects on the mechanical properties of AZ31B magnesium alloy

Microstructure and mechanical behaviour of an elevated temperature Mg-rare earth based alloy

Microstructure and tensile properties of a low-alloyed magnesium alloy: effect of extrusion temperature

Microstructure and Mechanical Properties of the Mg/Al Laminated Composite Fabricated by Accumulative Roll Bonding (Arb)

Elevated temperature mechanical behavior of Mg-Y-Zn alloys