Abstract:This study presents a novel strategy to accelerate the start-up of aerobic granular sludge (AGS) system and ensure the nutrient removal during cultivation. This new method consists of preparing the chitosan-based sludge aggregates outside the reactor and then seeding the reactor with such sludge aggregates. To prepare chitosan-based sludge aggregates, chitosan was dissolved in acetic acid solution acting as a cationic flocculant to bind negatively charged sludge together, and then the dissolved chitosan was in situ precipitated by readjusting pH to form stable sludge aggregates. The chitosan-induced charge neutralization and water-insolubility of chitosan were the two main reasons for the super-rapid formation of chitosan-based sludge aggregates. The as-prepared chitosan-based sludge aggregates had a much lower sludge volume index at 30 min (SVI30) (90.1 mL/g) than the original sludge (SVI30 = 328.0 mL/g). They also had some AGS-like characteristics such as large particle size (1300 μm) and fast settling velocity (23.8 m/h). Consequently, short settling time can be achieved and excessive biomass wash-out can be avoided in the rapid start-up of AGS system with chitosan-based sludge aggregates as inoculant, which was beneficial to accelerating sludge granulation while maintaining nutrient removal. Additionally, the abundances of filamentous bacteria and Candidatus Accumulibacter and the content of extracellular polymeric substances increased during cultivation, which could also contribute to the AGS formation. By seeding chitosan-based sludge aggregates in the anaerobic/oxic sequencing batch reactor, complete granulation was rapidly achieved in 10 days, and good removals of nitrogen and phosphorus was obtained after 14-18 days of cultivation.

Immobilization of Acclimated Sludge for Quick Start-up of Biological Activated Carbon Reactor

Synergistic Effect of Chitosan-Based Sludge Aggregates CS@NGS Inoculum Accelerated the Start-Up of Biofilm Reactor Treating Aquaculture Effluent: Insights into Performance, Microbial Characteristics, and Functional Genes.

Rapid method of aerobic granular sludge bioreactor start-up for domestic wastewater treatment

Biofilm performance in an aerobic fluidized bed reactor during the start-up period

Rapid Establishment of Algal-Bacterial Granular Sludge System by Applying Mycelial Pellets in a Lab-Scale Photo-Reactor under Low Aeration Conditions: Performance and Mechanism Analysis

Rapid startup of a hybrid UASB-AFF reactor using bi-circulation

Preliminary Approach on Formation Mechanism of Aerobic Granular Sludge During the Continuous Airlift Fluidized Bed Start-Up

Direct start-up of aerobic granular sludge system with dewatered sludge granular particles as inoculant

Rapid start-up of an aerobic granular sludge system for nitrogen and phosphorus removal through seeding chitosan-based sludge aggregates

Start-up and Acclimation of Anaerobic Baffled Reactor for Treatment of Diseased Animal Wastewater

Rapid granulation of aerobic sludge in a continuous-flow reactor with a two-zone sedimentation tank by the addition of dewatered sludge

Influence of Inoculated Sludge Quantity on Start-up of Hybrid Biofilm Reactor

Fast Start-Up Strategies for Internal Circulation Anaerobic Reactor

[Study on the start-up of anaerobic ammonium oxidation process in biological activated carbon reactor].

Rapid start-up of anammox reactor using granular sludge supported on activated carbon

STUDY ON THE START-UP IN AEROBIC MOVING-BED MULTI-STAGE AO BIOFILM REACTOR

Start-up of a Full-Scale SNAD-MBBR Process for Treating Sludge Digester Liquor

Granular Activated Carbon for Aerobic Sludge Granulation in a Bioreactor with a Low-Strength Wastewater Influent

PILOT STUDY ON FAST START-UP PROCESS OF BAF BIOLOGICAL AERATED FILTER

Rapid start-up and application of Anammox in a pilot-scale non-woven rotating biological contactor

The Start-up of ABR with the Anaerobic Granular Sludge