Abstract:There is an increasing need for fast and reliable analytical methods for the determination of chemical forms of elements in environmental samples. The interest in chromium is driven by the fact that its toxicity depends on its oxidation state. Although chromium (III) is essential for mammals to maintain their metabolism of proteins, fats, and carbohydrates, chromium (VI) is toxic to humans. For chromium speciation, several costly analytical methods coupling separation methods with atomic absorption and emission spectroscopy have been developed. This article presents the online robotic discrete analyser procedure with the 1,5 diphenylcarbazide (DPC) method for the speciation of Cr (III) and Cr (VI). Cr (III) was determined by difference since it does not interfere with the reaction of Cr (VI)-DPC. Chromium (VI) and total chromium were characterised sequentially (after online oxidation of Cr (III) by Cerium (Ce (IV)). The calibration graphs were linear under experimental conditions up to 1 mg/L Cr (VI) and 2 mg/L total Cr with correlation coefficient R2, 0.9997 and 0.9999 respectively. At a signal-to-noise ratio of three, the detection limits were 0.004 mg/L Cr (VI) and 0.015 mg/L total Cr. Good agreement between the real values of certified reference materials and the chromium species content was obtained in this study. The method was precise with a percentage relative standard deviation of less than 2 for hexavalent chromium and total chromium. The t-stat demonstrates that there was no significant difference between the developed robotic discrete analyser method and the ICP-MS method. Except for effluent water, which had recoveries between 65 and 75 % in the assessment of the devised method's selectivity, the overall percentage of recoveries fell between 90 and 110 %, which was generally satisfactory. This method proved to be appropriate for its intended use.

Exploring Surface Chemistry of Nano-Tio2 for Automated Speciation Analysis of Cr(iii) and Cr(vi) in Drinking Water Using Flow Injection and ET-AAS Detection

A Miniaturized Electrochemical System for High Sensitive Determination of Chromium(vi) by Screen-Printed Carbon Electrode with Gold Nanoparticles Modification

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry

Speciation Analysis of Cr(VI) and Cr(III) in Water with Surface-Enhanced Raman Spectroscopy

Flow Injection Microfluidic Device with On-Line Fluorescent Derivatization for the Determination of Cr(III) and Cr(VI) in Water Samples after Solid Phase Extraction.

A new surface molecularly imprinted polyacrylamide nanoprobe for trace Cr(VI) with RRS technique

Simultaneous Determination of Trace Cr(Iii) and Cr(Vi) in Water Using Ion-Pairing Reversed Phase Chromatography-Inductively Coupled Plasma Mass Spectrometry

Coating Fe3O4 Quantum Dots with Glutamic Acid to Achieve Enhanced Catalysis for Facile and Sensitive Detection of Chromium(vi) in Water.

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Ultrahigh Selective Colorimetric Quantification of Chromium(VI) Ions Based on Gold Amalgam Catalyst Oxidoreductase-like Activity in Water.

UIO-66/Ag/TiO2 Nanocomposites as Highly Active SERS Substrates for Quantitative Detection of Hexavalent Chromium

Determination of chromium species in water using diphenylcarbazide with a sequential spectrophotometric discrete robotic analyser

Studies on the stripping voltammetric determination and speciation of chromium at a rotating-disc bismuth film electrode

Using Ion-Pair Reversed-Phase HPLC ICP-MS to Simultaneously Determine Cr(III) and Cr(VI) in Urine of Chromate Workers.

A MWCNTs@CuAl2O4@SiO2 Nanocomposite for the Speciation of Cr(III), Cr(VI), and Total Chromium Prior to High-Resolution Continuum Source Flame Atomic Absorption Spectrometric Determination

Octyl coated cobalt-ferrite/silica core-shell nanoparticles for ultrasonic assisted-magnetic solid-phase extraction and speciation of trace amount of chromium in water samples

A novel sequential extraction method for the measurement of Cr(VI) and Cr(III) species distribution in soil: New insights into the chromium speciation

Colloidal gold nanoparticle probe-based immunochromatographic assay for the rapid detection of chromium ions in water and serum samples

TiO2 nanoparticle-Coated 3D-Printed porous monoliths enabling highly sensitive speciation of inorganic Cr, As, and Se

Determination of the speciation of chromium with an automated two-column ion-exchange system

Development of Solid Phase Extraction Method Based on Ion Imprinted Polymer for Determination of Cr(III) Ions by ETAAS in Waters