Abstract:The stability/instability behavior of polystyrene (PS) films with tunable thickness ranging from higher as-cast to lower residual made on Si substrates with and without native oxide layer was studied in this paper. For further extraction of residual PS thin film (hresi) and to investigate the polymer–substrate interaction, Guiselin’s method was used by decomposing the polymer thin films in different solvents. The solvents for removing loosely adsorbed chains and extracting the strongly adsorbed irreversible chains were selected based on their relative desorption energy difference with polymer. The PS thin films rinsed in chloroform with higher polarity than that of toluene showed a higher decrease in the residual film thickness but exhibited earlier growth of holes and dewetting in the film. The un-annealed samples with a higher oxide film thickness showed a higher decrease in the PS residual film thickness. The effective viscosity of PS thin films spin-coated on H-Si substrates increased because of more resistance to flow dynamics due to the stronger polymer–substrate interaction as compared to that of Si-SiOx substrates. By decreasing the film thickness, the overall effective mobility of the film increased and led to the decrease in the effective viscosity, with matching results of the film morphology from atomic force microscopy (AFM). The polymer film maintained low viscosity until a certain period of time, whereupon further annealing occurred, and the formation of holes in the film grew, which ultimately dewetted the film. The residual film decrement, growth of holes in the film, and dewetting of the polymer-confined thin film showed dependence on the effective viscosity, the strength of solvent used, and various involved interactions on the surface of substrates.

Effects of Substrate/polymer Interfacial Interactions on Dynamics of Thin Polystyrene Films

Dynamics and Structure Formation of Confined Polymer Thin Films Supported on Solid Substrates.

Affinity Of Polystyrene Films To Hydrogen-Passivated Silicon And Its Relevance To The T-G Of The Films

Substrate Effect on the Formation of Hydrogels with Heterogeneous Network Structure

Dynamics and Glass Transition Temperature of Polystyrene Films Supported on Hydroxyl Terminated Substrates

Enhanced Glass Transition Temperature of Thin Polystyrene Films Having an Underneath Cross-Linked Layer

Studying the Adhesion Force and Glass Transition of Thin Polystyrene Films by Atomic Force Microscopy

Size Effect On The Thermal Conductivity Of Ultrathin Polystyrene Films

Sensitive Characterization of the Influence of Substrate Interfaces on Supported Thin Films

Glass transition temperature of single-chain polystyrene particles end-grafted to oxide-coated silicon

T-g Confinement Effect of Random Copolymers of 4-Tert-butylstyrene and 4-Acetoxystyrene with Different Compositions

Mechanism of Density Evolution of Polystyrene Adsorbed Layers on the Substrate

Stability of Adsorbed Polystyrene Nanolayers on Silicon Substrates

Effects of Molecular Weight, Solvent and Substrate on the Dewetting Morphology of Polystyrene Films

Thermal-induced slippage of soft solid films.

Surface Effect on Mechanical Properties and Atomic Mobility of Ultrathin Polystyrene Films Using Molecular Dynamics Simulations

Influence of grafting on the glass transition temperature of PS thin films

Effect of Interfacial Roughness on Dewetting Behavior of Polystyrene/poly(methyl Methacrylate) Bilayer Film

Study of Elastic Modulus and Yield Strength of Polymer Thin Films Using Atomic Force Microscopy

Viscosity and Surface-Promoted Slippage of Thin Polymer Films Supported by a Solid Substrate

Glass Transition Temperature in Polystyrene Supported Thin Films: a SPM-based Investigation of the Role of Molecular Entanglement