Abstract:Abstract. Spatially-resolved spectroscopy provides a means for measuring the optical properties of biological tissues, based on analytical solutions to diffusion approximation for semi-infinite media under the normal illumination of infinitely small size light beam. The method is, however, prone to error in measurement because the actual boundary condition and light beam often deviates from that used in deriving the analytical solutions. It is therefore important to quantify the effect of different boundary conditions and light beams on spatially-resolved diffuse reflectance in order to improve measurement accuracy by the technique. This research was aimed at using finite element method (FEM) to model light propagation in fruit, subjected to the normal illumination by a continuous-wave beam of infinitely small or finite size. Three types of boundary conditions [i.e., partial current (PCBC), extrapolated (EBC) and zero (ZBC)] were evaluated and compared against Monte Carlo simulations, which provided accurate results in fluence rate and diffuse reflectance. The effect of beam size was also investigated. Overall results showed that FEM provided as accurate results as analytical method when an appropriate boundary condition was applied. ZBC did not give satisfactory results in most cases. FEM-PCBC yielded better fluence rate at the boundary than did FEM-EBC, while they were almost identical in predicting diffuse reflectance. Results further showed that FEM coupled with EBC simulated spatially-resolved diffuse reflectance under the illumination of finite size beam effectively. Large size beam introduced more error, especially within the region of illumination. Research also confirmed an earlier finding that a light beam of less than 1 mm diameter should be used for estimation of optical parameters. FEM is effective for modeling light propagation in biological tissues and can be used for improving the optical property measurement by spatially-resolved technique.

Study of the Penetration Behavior of Energetic Ions in Botanic Materials with Transmission Measurement

The Study of Penetration of Energetic Ions in Botanic Samples with Transmission Measurements

Study on the Dynamic Energy Spectra of Mev Heavy Ions Penetrating Biological Sample

Mechanism of Long-Range Penetration of Low-Energy Ions in Botanic Samples

The primary target model of energetic ions penetration in thin botanic samples

STUDIES ON THE LONG- RANGE PENETRATION BEHAVIOR OF LOW- ENERGY IONS IN BOTANIC SAMPLES

Transmission Measurement Based on Stm Observation to Detect the Penetration Depth of Low-Energy Heavy Ions in Botanic Samples

A New Detection Method in Studying Penetration Depth of Low－energy Heavy Ions in Botanic Samples

Finite element modeling of light propagation in fruit under illumination of continuous-wave beam

STM Observation of Damage on HOPG Induced by Energetic Ions Escaped from Thick Botanic Samples

Study on the desorption yield for natural botanic sample induced by energetic heavy ions

Positron Annihilation Study on Surface Structure of Biological Samples Implanted by Ions with Low Energy

A Study of Energy Loss and Straggling of MeV Protons in Biological Samples

Contrast of Dry and Water-saturated Arabidopsis Seeds Irradiated by MeV Energy Ions

Energy Loss and Straggling of MeV Ions Through Biological Samples

Quantification of Plasmodesmata Frequency under Three-Dimensional View Using Focused Ion Beam-Scanning Electron Microscopy and Image Analysis.

Energy Loss and Straggling of MeV Energy Ions Through Biological Samples

Influence of Low-Energy Ion Irradiation on Plasma Membrane Permeability of Cells

Germination of Arabidopsis thaliana seeds irradiated by MeV ions

Energy related germination and survival rates of water-imbibed Arabidopsis seeds irradiated with protons

An experimental method for measuring the electric fields induced by Tumor Treating Fields