Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Study on Properties of PE/MMT Nanocomposites Prepared by Melt Intercalation

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Study on thermal stability of PP/MMT nanocomposites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Synthesis and Properties of PE/PEMA/MMT Nano-composites

Study on Polyethylene Cross-linked with Silane/Nano-montmorillonite Composite

Poly(etherimide)/montmorillonite nanocomposites prepared by melt intercalation: morphology, solvent resistance properties and thermal properties

Fabrications of EPDM/MMT Nanocomposites by Melt Intercalation

Study on Properties of PLA/MMT Composites Prepared by Vane Extruder

Study on crystallization kinetics of polyethylene/organic-montmorillonite nano-composites

Thermal and Dynamic Mechanical Properties of Polypropylene-Montmorillonite (PP/MMT) Composites

Study on morphology, crystallization behaviors of highly filled maleated polyethylene-layered silicate nanocomposites

Study on Structure and Properties of Biodegradable PLA/PBAT/organic-modified MMT Nanocomposites

PP-PP-g-MAH-Org-MMT nanocomposites. I. Intercalation behavior and microstructure

Polypropylene/Montmorillonite Nanocomposites And Intumescent, Flame-Retardant Montmorillonite Synergism In Polypropylene Nanocomposites

THE PREPARATION AND CHARACTERIZATION OF HDPE-g-MAH-St/SMA-MMT NANOCOMPOSITES

Effect of compound organification of montmorillonite on the structure and properties of polypropylene/montmorillonite nanocomposites

Synthesis and Mechanical Properties of PE/O-Mmt Composites

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Preparation and Properties of Polypropylene/montmorillonite Layered Nanocomposites