Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Study on crystallization kinetics of polyethylene/organic-montmorillonite nano-composites

KINETICS OF ISOTHERMAL CRYSTALLIZATION FOR PET/MONTMORILLONITE NANOCOMPOSITES

PE/PE‐g‐MAH/Org‐MMT Nanocomposites. II. Nonisothermal Crystallization Kinetics

Study on thermal stability of PP/MMT nanocomposites

Non-isothermal crystallization kinetics of exfoliated and intercalated polyethylene/montmorillonite nanocomposites prepared by in situ polymerization

Effects of MXene on Nonisothermal Crystallization Kinetics of Isotactic Polypropylene.

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

Crystallization Behavior of Polyethylene/Montmorillonite(MMT) Nanocomposites by in Situ Polymerization

Non-Isothermal Crystallization Kinetics of Montmorillonite/Polyamide 610 Nanocomposites

Non‐isothermal Crystallization Kinetics of Polyamide 1010/montmorillonite Nanocomposite

Non-isothermal Crystallization Kinetics of Montmorillonite Filled Β-Isotactic Polypropylene Nanocomposites

Poly(Propylene)-Poly(Propylene)-Grafted Maleic Anhydride-Organic Montmorillonite (Pp-Pp-g-mah-org-mmt) Nanocomposites. Ii. Nonisothermal Crystallization Kinetics

Non-isothermal Melt Crystallization Kinetics of Polyethylene-Octene Elastomer/Starch Blends

Observation of Regime III Crystallization in Polyethylene/Montmorillonite Nanocomposites

Crystallization Behavior of Poly(vinylidene Fluoride)/montmorillonite Nanocomposite

Study on Properties of PE/MMT Nanocomposites Prepared by Melt Intercalation

Nonisothermal Crystallization Kinetics Of Poly(Epsilon-Caprolactone)/Montmorillonite Nanocomposites

Nonisothermal Melt Crystallization Kinetics of Poly(ethylene Terephthalate)/barite Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Study on Polyethylene Cross-linked with Silane/Nano-montmorillonite Composite

Melting and Non-Isothermal Crystallization Behaviors of Polypropylene and Polypropylene/montmorillonite Nanocomposites under Pressurized Carbon Dioxide