STUDY ON SPINNING TECHNOLOGY OF PVDF-PAN-ORGANIC NANO-CLAY COMPOSITE HOLLOW FIBER UF MEMBRANE

Zheng Weiping,Gao Xueli,Ma Yuxin,Wang Duo,Wang Liguo,Gao Congjie

DOI: https://doi.org/10.16796/j.cnki.1000-3770.2010.11.028

2010-01-01

Abstract:Polyvinylidene fluoride (PVDF)-Polyacrylonitrile (PAN)-organic nano-clay composite hollow fiber ultrafiltraton membrane was prepared by dry-wet spinning method. The main membrane material was PVDF which was commixed with PAN and the mass ratio of PVDF and PAN was 9:1. N,Ndimethyl acetamide was the solvent and anhydrous LiCl was employed as non-solvent additive. The effect factors such as air gap,external coagulant temperature,bore fluid temperature and so on were investigated. The effect of preparation technology on pure water flux,rejection of bovine serum albumin (BSA),porosity and tensile strength was studied. In addition,the structure and morphology of hollow fiber UF membranes were studied by scanning electron microscope (SEM). It was found that preparation technology affected both the structure and performance of hollow fiber membranes. Water flux increased with increasing temperature and air gap while rejection of BSA was the opposite. Elevated temperature was beneficial to mechanical properties and the maximum tensile strength was 3.16 MPa. Increase in concentration of bore fluid was conducive to inhibit the production of macroporous structure.