Reduction of excess sludge production in sequencing batch reactor through incorporation of chlorine dioxide oxidation.

Guanghua Wang,Jun Sui,Huishan Shen,Shukun Liang,Xiangming He,Minju Zhang,Yizhong Xie,Lingyun Li,Yongyou Hu
DOI: https://doi.org/10.1016/j.jhazmat.2011.04.099
IF: 13.6
2011-01-01
Journal of Hazardous Materials
Abstract:In this study, chlorine dioxide (ClO2) instead of chlorine (Cl2) was proposed to minimize the formation of chlorine-based by-products and was incorporated into a sequencing batch reactor (SBR) for excess sludge reduction. The results showed that the sludge disintegrability of ClO2 was excellent. The waste activated sludge at an initial concentration of 15g MLSS/L was rapidly reduced by 36% using ClO2 doses of 10mg ClO2/g dry sludge which was much lower than that obtained using Cl2 based on similar sludge reduction efficiency. Maximum sludge disintegration was achieved at 10mg ClO2/g dry sludge for 40min. ClO2 oxidation can be successfully incorporated into a SBR for excess sludge reduction without significantly harming the bioreactor performance. The incorporation of ClO2 oxidation resulted in a 58% reduction in excess sludge production, and the quality of the effluent was not significantly affected.
What problem does this paper attempt to address?