Abstract:To further increase the efficiency of multijunction thin-film silicon (TF-Si) solar cells, it is crucial for the front electrode to have a good transparency and conduction, to provide efficient light trapping for each subcell, and to ensure a suitable morphology for the growth of high-quality silicon layers. Here, we present the implementation of highly transparent modulated surface textured (MST) front electrodes as light-trapping structures in multijunction TF-Si solar cells. The MST substrates comprise a micro-textured glass, a thin layer of hydrogenated indium oxide (IOH), and a sub-micron nano-textured ZnO layer grown by low-pressure chemical vapor deposition (LPCVD ZnO). The bilayer IOH/LPCVD ZnO stack guarantees efficient light in-coupling and light trapping for the top amorphous silicon (a-Si:H) solar cell while minimizing the parasitic absorption losses. The crater-shaped micro-textured glass provides both efficient light trapping in the red and infrared wavelength range and a suitable morphology for the growth of high-quality nanocrystalline silicon (nc-Si:H) layers. Thanks to the efficient light trapping for the individual subcells and suitable morphology for the growth of high-quality silicon layers, multijunction solar cells deposited on MST substrates have a higher efficiency than those on single-textured state-of-the-art LPCVD ZnO substrates. Efficiencies of 14.8% (initial) and 12.5% (stable) have been achieved for a-Si:H/nc-Si:H tandem solar cells with the MST front electrode, surpassing efficiencies obtained on state-of-the-art LPCVD ZnO, thereby highlighting the high potential of MST front electrodes for high-efficiency multijunction solar cells. Copyright (c) 2015 John Wiley & Sons, Ltd.

22.7% Efficient Silicon Photovoltaic Modules with Textured Front Surface

22.7% Efficient Perl Silicon Solar Cell Module With A Textured Front Surface

Improved Efficiency Silicon Solar Cell Module

19.8% Efficient “honeycomb” Textured Multicrystalline and 24.4% Monocrystalline Silicon Solar Cells

A 19.8% Efficient Honeycomb Multicrystalline Silicon Solar Cell With Improved Light Trapping

18.2% Efficient Multicrystalline Silicon Cell

High-efficiency Multicrystalline Silicon Solar Cells using Standard High-temperature, Float-zoned Cell Processing

Monolithic Perovskite/Silicon Tandems with >28% Efficiency: Role of Silicon‐Surface Texture on Perovskite Properties

Very High Efficiency Silicon Solar Cells-Science and Technology

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Characterization of 23-percent efficient silicon solar cells

25-Percent Efficient Low-Resistivity Silicon Concentrator Solar-Cells

Effect of the Back Surface Topography on the Efficiency in Silicon Solar Cells

24% Efficient Silicon Solar Cells

Fabrication of 20.19% Efficient Single-Crystalline Silicon Solar Cell with Inverted Pyramid Microstructure

Small Pyramidal Textured Ultrathin Crystalline Silicon Solar Cells with Double-Layer Passivation.

Fully Textured, Production‐line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Highly transparent modulated surface textured front electrodes for high‐efficiency multijunction thin‐film silicon solar cells

Large area organic photovoltaic modules fabricated on a 30 cm by 20 cm substrate with a power conversion efficiency of 9.5%

Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W