Abstract:Mechanical analysis and optimal design of down-hole tubular strings with connectors are the key theoretical bases of design and operation in extended-reach and horizontal drilling and completion. However, the complex mechanical interaction between spring connectors and open wellbores are not fully considered in conventional tubular models and the conventional design methods are mostly based on experience and lack of rigorous mathematical derivations. To overcome these shortcomings, a new revised mechanical model and an optimal design method of connectors on down-hole tubular strings have been built. Firstly, the local loads on a unified connector which can depict common spring and rigid connectors constrained in open wellbores are studied. The local connector loads are further introduced into the local mechanical model of tubular strings. The integral mechanical model of tubular strings is amended by the local model. Next, the integral design model of connectors while considering friction reduction, tubular centricity and cost is built. The integral design model is divided into a series of local design models according to the properties of tubular mechanical behaviors on extended-reach and horizontal wellbores. At last, the mechanical model and design method are applied to drill strings with joints and casing strings with centralizers in horizontal drilling and completion. The results indicate that the revised tubular mechanical model and connector design model are stable and fast. The coupling effects of connector and buckling, local drags on connector and radial compression of spring connectors are all included in the mechanical model, so the new model gives a more sophisticated description of mechanical behaviors of tubular strings with connectors. The design results of anti-drag joints are closely related to the clean condition of wellbores. Proper optimal design of connectors and good clean condition of wellbores can inhibit helical buckling, decrease friction factor and reduce plough effect, leading to larger lateral extending limits. Compared with the initial design results of centralizers, friction force is decreased and casing centricity is increased through optimization design. The optimization results of centralizers are closely related to the weight values of friction reduction, casing centricity and cost. Therefore, the key problem is how to assign these three weight values under actual engineering conditions.

Mechanics analysis and design of connecting thread in casing drilling

A special thread design for failure prevention of expandable casing

Experimental investigation of mechanical behavior of grade 8.8 and 10.9 small-sized (m14-m20) bolts with the thread into the bolt hole

Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model

Mechanical Model and Optimal Design Method of Tubular Strings with Connectors Constrained in Extended-Reach and Horizontal Wells

Experimental and numerical simulation study on coupling tripping of partial trapezoidal threaded casing head and casing coupling

Mechanical Analysis of Drill String Drag and Torque with the Condition of Irregular Borehole

Stress-conversion-based Approach of High-cycle Fatigue Strength Analysis for Internal Threads

Research on Thread Seal Failure Mechanism of Casing Hanger in Shale Gas Wells and Prevention Measures

Distributions of tension and torsion in a threaded connection

A novel thread connection structure of slimehole drilling tool in ultra-deep natural gas well

Fracture failure analysis and structure improvement on thread joint of turbine shaft

Finite Element Simulations of Working Characteristics of Solid Expandable Tubular Threaded Joint

Investigation of the influence of the location of the main plane of the thread on the stress-strain state of the locking threaded connection of the elements of the drill string

Design and rigid body dynamics analysis of a novel retractable drill bit used in casing-while-drilling

Failure analysis of wellhead casing and optimization of slip hanger in ultra deep wells

Optimization Design of a Riser-Drill String Coupling System Based on CAE Techniques

A multibody dynamical model of full-hole drillstring system

Finite Element Simulations of Mechanical Properties of Solid Expandable Tubular Threaded Joint

A Multiaxial Fatigue Reliability Analysis Method of Casing Drilling in Casing String

A dynamic method for post buckling analysis of drill string in vertical wells