Abstract:Tsinghua University's low-temperature nuclear heating reactor (NHR) primarily focused on heating supply in its initial design. However, utilizing the reactor solely as a heat source limits its economic efficiency and competitiveness. To further broaden the application scope of the NHR200-II reactor, several modifications were implemented based on the original design. These include replacing the vertical steam generator with a horizontal one, which facilitates easier discharge of fouling, and add a superheater to enhance the thermal parameters values of the secondary loop to generate the desired superheated steam for industrial users. A comprehensive numerical modeling approach was employed to establish the primary loop, intermediate loop, secondary loop, and the passive residual heat removal system (PRHR) models for the NHR200-II reactor. The computational results indicate that the novel superheated steam supply system of the NHR200-II reactor exhibits good power control capability within the range of 50%-100% of the full power, with a step size of 10%. Moreover, the reactor demonstrates the ability to operate between 50% and 100% of the full power for a 24-h period, meeting the superheated steam demand of an industrial plant in a Chinese demonstration project. Furthermore, in the event of a reactor shutdown, the passive residual heat removal system efficiently removes the residual heat from the reactor core, thus preventing core meltdown accidents. The power between the reactor core and the superheated steam supply system could be well matched, and there could also be effective power distribution and coordination among the three heat exchangers. These numerical simulation results not only verify the new design of NHR200-II, but also contribute to the advancement of a demonstration project for a low-temperature nuclear heating reactor.

Design and analysis of high temperature superconducting adjustable reactor

Development of a Conduction-Cooled HTS SMES

Control Design of a Modular Current Source Power Conditioning System for High Temperature SMES

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Optimization Configuration of High Voltage Reactors in Large Power Grid

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

Research on the Characteristics of a High-temperature Superconducting Leakage Flux-controlled Reactor

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

General Design of a 300-Kvar HTS Synchronous Condenser Prototype

Design and heat leak analysis of a HTS DC cable system

Optimization of HTS Transformer Parameters and Analysis of AC Losses Under Harmonic Conditions

Research on Power Regulation and Distribution of the Improved NHR200-II Low Temperature Nuclear Heating Reactor

Experimental and Numerical Study of a DC Induction Heater Prototype with an Adjustable Air Gap Structure

Supercritical Steam Generator Design of Modular High-Temperature Gas-Cooled Reactor

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Electromagnetic Field Analysis and Optimization Method of High-Temperature Superconducting Transformer under the Influence of Abnormal Voltage

Development of Testing Device for Critical Current Measurements for HTS/LTS

DESIGN AND MEASUREMENT ON POWER HANDING CAPABILITY FOR HIGH TEMPERATURE SUPERCONDUCTIVE FILTER

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet