Abstract:This paper presents the preparation and thermal/physical characterization of phase change materials (PCMs) based on poly(ethylene glycol) 400 g·mol−1 and nano-enhanced by either carbon black (CB), a raw graphite/diamond nanomixture (G/D-r), a purified graphite/diamond nanomixture (G/D-p) or nano-Diamond nanopowders with purity grades of 87% or 97% (nD87 and nD97, respectively). Differential scanning calorimetry and oscillatory rheology experiments were used to provide an insight into the thermal and mechanical changes taking place during solid-liquid phase transitions of the carbon-based suspensions. PEG400-based samples loaded with 1.0 wt.% of raw graphite/diamond nanomixture (G/D-r) exhibited the lowest sub-cooling effect (with a reduction of ~2 K regarding neat PEG400). The influences that the type of carbon-based nanoadditive and nanoparticle loading (0.50 and 1.0 wt.%) have on dynamic viscosity, thermal conductivity, density and surface tension were also investigated in the temperature range from 288 to 318 K. Non-linear rheological experiments showed that all dispersions exhibited a non-Newtonian pseudo-plastic behavior, which was more noticeable in the case of carbon black nanofluids at low shear rates. The highest enhancements in thermal conductivity were observed for graphite/diamond nanomixtures (3.3–3.6%), while nano-diamond suspensions showed the largest modifications in density (0.64–0.66%). Reductions in surface tension were measured for the two nano-diamond nanopowders (nD87 and nD97), while slight increases (within experimental uncertainties) were observed for dispersions prepared using the other three carbon-based nanopowders. Finally, a good agreement was observed between the experimental surface tension measurements performed using a Du Noüy ring tensiometer and a drop-shape analyzer.

Preparation and properties of phase change materials PEG/CPE

Preparation, Property and Application of Phase Change Material Emulsions

The Shape-Stabilized Phase Change Materials Composed Of Polyethylene Glycol And Various Mesoporous Matrices (Ac, Sba-15 And Mcm-41)

Preparation and characterization of polyethylene glycol‐based form‐stable phase change materials supported by poly (vinyl formal) foams

Study on the Preparation and Properties of PEG Phase Change Materials Fixed by Semi-IPN

Preparation and Characterization of Polyethylene Glycol/Active Carbon Composites As Shape-Stabilized Phase Change Materials

Shape-stabilized phase change material with high phase change enthalpy made of PEG compounded with lignin-based carbon

Fabricated Polyethylene glycol/ hydroxylated carbon nanotubes shape-stabilized phase change materials with improving thermal conductivity

Phase Change Materials Based on Polyethylene Glycol Supported by Graphene-Based Mesoporous Silica Sheets

Shape-stabilized Phase Change Materials Based on Polyethylene Glycol/porous Carbon Composite: the Influence of the Pore Structure of the Carbon Materials

Morphology, thermal and mechanical properties of electrospun polyvinylidene/polyethylene glycol composite nanofibers as form-stabilized phase change materials

Temperature dependence of thermophysical properties of polyethylene glycol in solid/liquid phase change region

Carbon layer-modified mesoporous silica supporter for PEG to improve the thermal properties of composite phase change material

Investigation on interfacial interaction and thermal properties of flame retarded wood-plastic form-stable phase change material

Efficient Shape-Stabilized Phase-Change Material Based on Novel Mesoporous Carbon Microspheres As a Matrix for Polyethylene Glycol: Preparation and Thermal Properties

Thermal and Mechanical Robust Solid‐Solid Phase Change Materials Enabled by Reactive Crosslinkable Poly(Ethylene Glycol)s via Facile Thiol‐Ene Photo‐Click Chemistry

High thermal conductivity and low leakage phase change materials filled with three-dimensional carbon fiber network

Polyethylene Glycol–Calcium Chloride Phase Change Materials with High Thermal Conductivity and Excellent Shape Stability by Introducing Three-Dimensional Carbon/Carbon Fiber Felt

Thermal and Physical Characterization of PEG Phase Change Materials Enhanced by Carbon-Based Nanoparticles

Thermal conductivity enhancement of polyethylene glycol/NF composite as stabilized phase change materials for thermal energy storage

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage