Abstract:Formation mechanism of the composite phase change material: A composite phase change material was prepared using bamboo charcoal (BC) embedded with polyethylene glycol (PEG) as PCM and low density polyethylene (LDPE) as matrix. Phase change materials (PCMs) are often used as building materials to reduce the energy consumption. However, conventional PCMs are susceptible to leakage and have a short service life. To solve this problem, thermal energy storage (TES) composites were fabricated by using bamboo charcoal (BC) encapsulating polyethylene glycol (PEG) as the PCM and low density polyethylene (LDPE) as the matrix. The shape and structure of BC and BC‐plastic composites were examined using scanning electron microscopy, X‐ray diffractometry, and mercury intrusion porosimetry. Differential scanning calorimetry, thermogravimetry (TG), and infrared thermography were used to characterize the manufactured TES composites. Physical and mechanical strength assessments were also conducted. The results demonstrated that: (1) BC possessed a rich void structure with a porosity of 61.4%, which could be used to adsorb PEG and the composites was a combination of PEG, BC, and LDPE with no chemical reaction; (2) thermal tests demonstrated that the composites exhibited favorable temperature regulation properties, featuring a maximum latent heat capacity of 29.1 J/g along with suitable phase change temperatures, yet thermal durability needs to be improved much further, addition of PEG reduced thermal conductivity of the composite from 0.38 to 0.34 W/mK; (3) the addition of PEG was beneficial for the impact strength but had a negative impact on the flexural and tensile properties; and (4) due to their satisfactory thermal performance and acceptable mechanical properties, these TES composites can be effectively utilized as building materials for temperature control purposes. Highlights Bamboo charcoal (BC) had a large number of pores that can encapsulate polyethylene glycol (PEG). PEG/BC performed satisfactory latent heat. Low density polyethylene was used as the matrix to realize the second encapsulation of phase change material. Thermal energy storage composites had excellent stability and good heat storage capacity. PEG incorporation negatively affected flexural and tensile properties.

Shape-stabilized phase change material with high phase change enthalpy made of PEG compounded with lignin-based carbon

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Shape-stable composite phase change materials encapsulated by lignin-based ordered porous carbon for thermal energy storage

Shape-stabilized Phase Change Materials Based on Polyethylene Glycol/porous Carbon Composite: the Influence of the Pore Structure of the Carbon Materials

The Shape-Stabilized Phase Change Materials Composed Of Polyethylene Glycol And Various Mesoporous Matrices (Ac, Sba-15 And Mcm-41)

Fabricated Polyethylene glycol/ hydroxylated carbon nanotubes shape-stabilized phase change materials with improving thermal conductivity

Green, recyclable and high latent heat form-stable phase change composites supported by cellulose nanofibers for thermal energy management

Polyethylene Glycol/mesoporous Calcium Silicate Shape-Stabilized Composite Phase Change Material: Preparation, Characterization, and Adjustable Thermal Property

Preparation and properties of phase change materials PEG/CPE

Morphology, thermal and mechanical properties of electrospun polyvinylidene/polyethylene glycol composite nanofibers as form-stabilized phase change materials

Preparation and thermal properties of shape-stabilized composite phase change materials based on polyethylene glycol and porous carbon prepared from potato

Efficient Shape-Stabilized Phase-Change Material Based on Novel Mesoporous Carbon Microspheres As a Matrix for Polyethylene Glycol: Preparation and Thermal Properties

Polyethylene Glycol-Carbon Nanotubes/Expanded Vermiculite Form-Stable Composite Phase Change Materials: Simultaneously Enhanced Latent Heat and Heat Transfer

Preparation and Characterization of Polyethylene Glycol/Active Carbon Composites As Shape-Stabilized Phase Change Materials

Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Plastic composite of bamboo charcoal stabilized polyethylene glycol with thermal energy storage and temperature regulation for building energy efficiency

Stable and reliable PEG/TiO2 phase change composite with enhanced thermal conductivity based on a facile sol-gel method without deionized water

High thermal conductivity and low leakage phase change materials filled with three-dimensional carbon fiber network

Design and Preparation of Shape-Stabilized Composite Phase Change Material with High Thermal Reliability Via Encapsulating Polyethylene Glycol into Flower-Like Tio2 Nanostructure for Thermal Energy Storage

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

Polyethylene Glycol Supported by Phosphorylated Polyvinyl Alcohol/graphene Aerogel As a High Thermal Stability Phase Change Material