Abstract:Modified polypentafluorophenyl methacrylate with side‐groups of both POSS and alkane is prepared and blended with polypropylene through melt‐blending process. It is proved that this blend not only demonstrates durable hydrophobicity and enhanced mechanical properties due to its surface segregation, orientation, and crosslinking, but also can maintain those properties under many extreme conditions. Durable functionalization on polypropylene (PP) surfaces is always a key problem to besolved. Coatings with low surface energy peel off easily especially under extreme conditions, owing to their weak adhesion. In this paper, side groups of both polyhedral oligomeric silsesquioxane (POSS) and alkane are grafted to polypentafluorophenyl methacrylate (PFP), and then PP blends with these side‐group modified PFP are obtained through a melt‐blending process. It is found that POSS can result in surface segregation and provide hydrophobicity in blends. Microfibers are formed because of the orientation effect during the tensile testing, which furtherly promotes mechanical strength. Significantly, alkaneside‐groups can be entangled with PP segments, which brings about cross linking. Therefore, with crosslinking and synchronous orientation of POSS, the elongation at the break of blends is greatly increased up to 974%. The final blend demonstrates quite durable hydrophobicity under many extreme conditions, such as repeated tape peeling, ultrasonic washing, strong friction, and soaking in strong acid (pH = 1), strong alkali (pH = 14) and alcohol. The heat and UV resistance of the blend are also obviously improved. This study will develop anovel and facile strategy to endow PP with durable hydrophobicity as well as greatly enhanced mechanical properties.

Surface Modification of Polypropylene. I. Surface Enrichment of Poly(Ethylene Glycol) on Polypropylene/Poly(Ethylene Glycol) Blends

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Surface Modification of Polypropylene by the Entrapping Method Using the Short-Chained Stearyl-Alcohol Poly(Ethylene Oxide) Ether Modifier

Polypropylene Glycol: the Hydrophilic Phenomena in the Modification of Polyethersulfone Membranes

Improvement of PET surface hydrophilicity and roughness through blending

Surface Modification Of Linear Low-Density Polyethylene Film By Amphiphilic Graft Copolymers Based On Poly(Higher Alpha-Olefin)-Graft-Poly(Ethylene Glycol)

Amphiphilic PPESK-graft-P(PEGMA) copolymer for surface modification of PPESK membranes

Surface Modification of Poly Ethylene Glycol to Resist Nonspecific Adsorption of Proteins

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

A Mechanistic Investigation of the Directional Entrapping Modification on the Semicrystalline Polypropylene Surface

HYDROPHILIC MODIFICATION OF PPESK POROUS MEMBRANES VIA AQUEOUS SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

Follicular steroid content and oocyte meiotic status after PMSG stimulation of immature hamsters.

Surface modification of anhydrous phosphogypsum and its application in isotactic polypropylene

The effect of addition of poly(propylene-g-acrylic acid) on the morphology of poly(vinyl methylether) and isotactic polypropylene blend

Surface Modification of Polypropylene Microporous Membranes by the Adsorption of Non-Ionic Surfactants

Polypropylene Blends with Durable Hydrophobicity and Enhanced Mechanical Properties Based on POSS and Alkane Modified Polypentafluorophenyl Methacrylate

Tethering Hydrophilic Polymer Brushes Onto PPESK Membranes Via Surface-Initiated Atom Transfer Radical Polymerization

Polypropylene/polypropylene-grafted acrylic acid copolymer/ethylene–Acrylic acid copolymer ternary blends for hydrophilic polypropylene

Chemical modification of poly(vinyl chloride) resin using poly(ethylene glycol) to improve blood compatibility