Abstract:This paper experimentally investigates the condensation of R365mfc in a micro-structured corrugated gap with mixed 27 degrees/63 degrees chevron angle. The condensation mechanisms are analyzed by visualizing the flow patterns through a transparent polyurethane plate, and the measurements are carried out at saturation pressure 1.12 bar (p(red) = 0.034), mass flux between 6.14 and 44.56 kg/m(2)s and a mean vapor quality from 0.58 to 0.92. Six flow patterns are identified as the mass flux is decreasing: annular flow, wispy-annular flow, partial film flow, smooth liquid film flow, churn flow and slug flow. A flow pattern map is drawn as a function of mass flux and vapor quality, G approximate to 20 kg/m(2)s is considered as a transition, after which no partial film flow is observed. The combination of G approximate to 20 kg/m(2)s and x approximate to 0.83 is the transition of the condensation mechanism between gravity controlled condensation and a combination of gravity-controlled and convection condensation. The frictional pressure drop increases with the increase of mass flux and vapor quality and is not influenced by flow patterns. The experimental heat transfer coefficients and frictional pressure drop are compared with the prediction results calculated by the correlations in the literature and a new heat transfer model is developed, which includes the individual heat transfer models of a gravity-controlled regime, a transition regime and a shear force-controlled regime as well as the transition criterion between these regimes. The new model predicts 97% of experimental data within +/- 30%, the root mean square error and the mean absolute error is 12.7% and 9% respectively.

Experiment on Frictional Pressure Drop of Condensation in Microchannel

An Experimental Investigation on Pressure Drop of Steam Condensing in Silicon Microchannels

Pressure Drop of Steam During Condensation in Trapezoidal Microchannels

Experimental Study on Two-Phase Flow Pressure Drop During Steam Condensation in Trapezoidal Microchannels

Experimental Study on Steam Condensation in Horizontal Microchannels

Frictional Pressure Drop During Steam Stratified Condensation Flow in Vacuum Horizontal Tube

Experimental Investigation on Two-phase Flow Pressure Drop of R22 During Condensation in a Rectangular Microchannel

Analytical and Experimental Determination of Slug Flow Parameters, Pressure Drop and Heat Transfer Coefficient in Micro-Channel Condensation

Experimental Study on Two-Phase Flow Pressure Drop During Ethanol–water Vapor Mixture Condensation in Microchannels

Heat Transfer and Pressure Drop During Condensation of R152a in Circular and Square Microchannels

An Experimental Investigation of Pressure Drop in Two-Phase Flow during the Condensation of R410A within Parallel Microchannels

Simulation of Condensation Flow in A Rectangular Microchannel

Pressure drop coefficient for abrupt contraction of parallel multi-microchannels

Study on Pressure Drop of Flow Boiling in a Rectangular Microchannel

Measurements Of Single-Phase And Two-Phase Flow Pressure Drops In Capillary Triangular Channels

Experimental Study on Steam Condensation with Non-Condensable Gas in Horizontal Microchannels

Condensation Heat Transfer of Steam on Vertical Micro-Tubes

Flow Pattern, Heat Transfer and Frictional Pressure Drop Investigation of R365mfc Condensation in a Micro-Structured Corrugated Gap with Mixed Angles

Experimental investigation on flow condensation pressure drop of steam in a horizontal tube

Single-phase flow and heat transfer in micro-channels

Computational and Experimental Investigation of Condensation Flow Patterns and Heat Transfer in Parallel Rectangular Micro-Channels