Abstract:In order to meet the demands of fast rise times, short pulsewidth, and high repetition frequency and enhance the output current level of the Marx pulse generator for high-power pulse applications, this article proposes a pulse generating technique based on parallel SiC MOSFETs. The magnetic induction current balance (MICB) method is employed to effectively address the issue of current imbalance by utilizing a coupling coil, enabling Marx pulse generator to achieve larger pulse current output. The mechanism of generating and suppressing transient as well as static unbalanced currents is analyzed by establishing mathematical model. The ability of magnetic induction coupling coil to suppress static imbalance current during the pulse plateau is accurately evaluated to ensure great current equalization effect for different pulse widths. Circuit simulations verify theoretical correctness and effectiveness. The magnetic induction coupling coils are designed and optimized based on theory and simulation, enhancing the generator compactness. Additionally, an eight-stages Marx prototype is built, and performance tests are conducted. The results demonstrate that, under the conditions of the pulse source output voltage of 5 kV, output current of 50 A, maximum repetition frequency of 10 kHz, and pulse widths ranging from 50 to 1000 ns, the magnetic induction coupling coils effectively suppress the transient and static imbalance currents in the parallel SiC MOSFETs. This ensured the reliability and stability for the larger current output of the pulse generator. Higher voltage and larger current outputs can be achieved by increasing the number of Marx modules and parallel switching devices.

Design And Test Of Inductive Adder Pulse Generator For Kickermagnet

Technology of Pulse Generators for Kicker Magnets

Modeling of an Inductive Adder Kicker Pulser for Darht-II

Development of a High-repetition-rate Lumped-inductance Kicker Magnet Prototype for the Beam Switchyard of SHINE

Effect of Kicker Circuit Inductance on the Transmission-Line Discharging

Design of a 3 kA Compact Pulse Generator for The Pulsed Current Injection Test

Design and Characterization of A High-Power Induction Module at Megahertz Repetition Rate Burst Mode

Design of Inductive Pulsed Current Generator Based on Solid-State Marx Adder

Magnetically and Optoelectronically Isolated Trigger for Pulse-Power Applications

500Kv Compact Repetitive Marx Generator

Development of a prototype kicker magnet for csns\rcs extraction

Study of mosfet solid-state modulator for fast kicker

An Integrated Testbed with Single DC Source for Delivering Symmetrical Square-Wave Excitation Voltage in the Triple Pulse Test.

Cell circuit design and test of a high power solid state modulator

Design, Construction, and Testing of an 80-kJ and 2.4-MJ/m<SUP>3</SUP> Inductive Pulsed Power Module for Electromagnetic Launchers

A Current-Pulse Generator with an Intermediate Storage for Inductive-Resistive Load Operation

Physical and Structural Design of Fast Extraction Kickers for CSNS/RCS

Parallel SiC MOSFETs Marx Pulse Generator Based on Magnetic Induction Current Balance

Study of Pulse Magnetic Field Calculation of Kicker Magnet in HLS Storage Ring

Iron lamination and interlaminar insulation for high-frequency pulsed magnets

Conceptual Design and Comparison for 100-Kj Inductive Pulse Power Supplies