Abstract:Impact-ionization wave triggering of a thyristor enables it to switch significantly higher currents with much faster rise times ($ ext{d}I / ext{d}t$ ) than through conventional triggering; indeed tests on commercial components demonstrate that both current and $ ext{d}I / ext{d}t$ can be increased an order of magnitude over their specified datasheet values by utilizing impact ionization. However, creating an impact ionization wave places stringent requirements on the generator used to trigger the thyristor—particularly the trigger pulse must have a voltage rise rate ($ ext{d}V / ext{d}t$ ) of more than 1 kV/ns and an amplitude over twice the thyristors static breakdown voltage. Given the capacitance of a thyristor is relatively large, often hundreds of pF, this is difficult to achieve with many common triggering methods. In this study, we present a bespoke, cost-effective, trigger generator that has been developed based on spiral/vector inversion techniques coupled to an optimized sharpening circuit. Using this generator, both a 2-kV single thyristor and a 4-kV stack of two thyristors in series were triggered in the impact-ionization mode. The thyristors had a wafer diameter of 32 mm and capacitances of 370 pF. With a single thyristor 100 shots were performed with it switching a peak current of 1.25 kA and an associated $ ext{d}I / ext{d}t$ of 12 kA/$mu ext{s}$ . With two thyristors, peak currents of 2.6 kA and with $ ext{d}I / ext{d}t$ of 25 kA/$mu ext{s}$ were achieved. In all experiments no degradation of the semiconductor structure was observed. The work opens the way for developing very powerful, but still compact, solid-state trigger generators and larger pulsers for a wide range of pulsed power applications.

Magnetically and Optoelectronically Isolated Trigger for Pulse-Power Applications

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

A pulsed power generator with a 20 stage transmission-line-transformer and 20 spark-gap switches

Development of Coaxial Discharge Multi-Output Pusle Trigger with Fast Rise Time Based on High Voltage Silicon Reactor Rectifier Energy Storage

Novel Multiple-switch Pulsed Power Technologies

A Ttl-Controlled Trigger Generator with Rise-Time of Nanosecond Level

Development of a sub-nanosecond jitter eight-output 150-kv trigger generator*

Self-triggering Topology for High-Power Nanosecond Pulse Generators Based on Avalanche Transistors Marx Bank Circuits and Linear Transformer Driver

The influence mechanism of leakage inductance and distributed capacitance on nanosecond pulse transformer-type trigger

A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge with Low Trigger Voltage

A High Voltage Pulse Generator Based on Silicon-Controlled Rectifier for Field-Reversed Configuration Experiment

Multi-module and Multi-Output 100 Kv Triggering Generator System with Fast Rise Time and Low Jitter

Design and Performance of a Plasma-Jet Triggered Graphite Trigatron Switch

2-kV Thyristor Triggered in Impact-Ionization Wave Mode by a Solid-State Spiral Generator

A High-Energy Spark Gap Switch and Trigger System

Development of a Marx-coupled Trigger Generator with High Voltages and Low Time Delay.

A 7.8 kV nanosecond pulse generator with a 500 Hz repetition rate

Model Analysis and Simulation of a Self-Trigger LTD Module

A Subnanosecond Jitter Trigger Generator Utilizing Trigatron Switch and Avalanche Transistor Circuit

Design of Controllable Delay High Voltage Pulse Generator