Abstract:One developing direction of large drive sources today is that tens of modules, consisting of hundreds of pulsed power stages connected in series, operate in parallel to produce a high pulsed power required. One set of reliable trigger system providing multi-output trigger pulses with low delay and jitter is crucial to synchronize for many pulsed power modules reliably. To search a simple spark gap structure as the output switch of the developed trigger generator, a trigatron with a disc-shaped trigger electrode and its modified structure with a rod-shaped trigger electrode are fabricated and tested in this paper. The results indicate that the two gas spark gaps have similar breakdown delay and jitter when the charging voltage ratio is higher than 80%, but the modified version has a wider operating voltage range. For its better operating performance and simplified structure, the modified spark gap structure has been chosen as the output switch, and a set of compact 150-kV trigger generator with eight output cables is developed. Testing results indicate that the developed trigger generator in this paper provides a highest output voltage of about 150-kV with a risetime of 10-ns (for four or less than four output cables) or 16-ns (for eight output cables), and a short output delay of less than 20-ns with a jitter of less than 1-ns. Similar operating performance data has been obtained through the primary synchronizing operation of two sets such trigger generators, which indicates that the novel developed trigger generator possesses a potential of a lot numbers operating in parallel to provide enough output trigger pulses for synchronizing hundreds of pulsed power modules. ©2009 IEEE.

A Subnanosecond Jitter Trigger Generator Utilizing Trigatron Switch and Avalanche Transistor Circuit

Development Of A High Performance Tigger Generator With Low Jitter, Fast Rise Time

Development of a sub-nanosecond jitter eight-output 150-kv trigger generator*

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

A pulsed power generator with a 20 stage transmission-line-transformer and 20 spark-gap switches

A Repetitive Nanosecond Pulses Generator Based on Avalanche Transistor Marx Circuits and Transmission Line Transformer

Development of a Marx-coupled Trigger Generator with High Voltages and Low Time Delay.

A Ttl-Controlled Trigger Generator with Rise-Time of Nanosecond Level

Multi-module and Multi-Output 100 Kv Triggering Generator System with Fast Rise Time and Low Jitter

Self-triggering Topology for High-Power Nanosecond Pulse Generators Based on Avalanche Transistors Marx Bank Circuits and Linear Transformer Driver

Improved Marx Pulse Generator With Auxiliary Trigger Topology (2022)

A Nanosecond Pulse Generator Based on the Combination of Avalanche Transistor Marx Circuit and Transmission Line Transformer

A compact solid-state high repetition rate trigger based on a spiral generator

Development Of A Stereo-Symmetrical Nanosecond Pulsed Power Generator Composed Of Modularized Avalanche Transistor Marx Circuits

Self-Triggering High-Frequency Nanosecond Pulse Generator

Trigger system of two-electrode gas spark switch

Note: All Solid-State High Repetitive Sub-Nanosecond Risetime Pulse Generator Based on Bulk Gallium Arsenide Avalanche Semiconductor Switches.

Performance Improvement For Sub-Nanosecond Marx Generator Based On Avalanche Transistors By Considering The Traveling Wave Process

Fast-rise-time Trigger Source Based on Solid-State Switch and Pulse Transformer for Triggered Vacuum Switch

High Voltage Nanosecond Pulse Generator Based on Avalanche Transistor Marx Bank Circuit and Linear Transformer Driver.