Abstract:In this paper, the competing requirements of material strength, casting formation and residual stress are considered in the design of a large bulkhead integral isothermal forging die using a design approach that incorporates an outer ring plus a die body. Thermal stress assembly was conducted to resolve the various manufacturing issues encountered in the production of this large-scale casting. This paper also proposes a design method for an expansion joint and material-saving holes to homogenize the cross-sectional thickness of the casting die by solving problems associated with defects and hot cracking during the casting process. The finite element method was used based on the equivalent liquid level descending method, the Niyama criterion, etc., to analyze the pouring of the sand model with different risers to choose the casting process. To resolve the occurrence of hot cracks during production, the design was optimized and the process was improved in combining with the simulation analysis result, after which carrying out another finite element analysis and by re-verifying the production process again. The results show that the simulated porosity, shrinkage and stress distribution are in accord with the practical production status. Based on the mechanical properties and a microstructure analysis, the tension strength of the K3 casting die at 950 °C is approximately 635 MPa, and the microstructures are typical dendrites. However, through the simulation, practical production, and analysis of the mechanical properties and microstructure, the die design method proposed in this paper offers benefits in solving casting forming problems and hot cracking of an integral oversized titanium bulkhead casting die, and a K3 superalloy die with a weight of 7.8 tons was successfully cast.

Optimization Design of Gelin-Bolted Joint of Magnesium Alloy Die Casting Machine

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Failure Analysis and Structure Improved Design for Drag Link of Large Magnesium Alloy Casting Machine

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

FEA Modelling and Analysis of Die Casting Machine for Large Mg Alloy

Optimization of Main Shaft Structure of Centrifugal Casting Machine Based on ANSYS Workbench

Optimum Analysis Of Cast Aluminum Joints In Aluminum Alloy Lattice Shell Structures

Die Casting Die Design and Process Optimization of Aluminum Alloy Gearbox Shell

FEA of solid plate weight-reduction design of large-scale magnesium alloy die cast machine

Optimum Design and Analysis of Metal Delivery System for Magnesium Alloy Plates with Twin-Roll Casting Process

Optimization design of main hinge joint structure based on weld failure analysis

Optimization of Gating System Design for Die Casting of Thin Magnesium Alloy-Based Multi-Cavity LCD Housings

Structural design of stamping die of advanced high-strength steel part for automobile based on topology optimization with variable density method

Simplified Design Method of Loading Capacity of Novel Cast Aluminum Joint in Aluminum Reticulated Shell Structures

Simulation and Optimization of Casting Technique on Upper Beam of 80MN Rapid Forging Press

Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy

Design and Optimization of Casting Technology for Steel Beam

Bearing Performance and Design Method of Aluminum Alloy Bolted Connections