Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

A TWO-FLUID MODEL FOR NUMERICAL SIMULATION OF SUBCOOLED BOILING FLOW OF LIQUID NITROGEN

CFD Simulations and Experimental Verification on Nucleate Pool Boiling of Liquid Nitrogen

Numerical simulation on pressure drop of slush nitrogen flow inside a horizontal pipe

Modelling and Numerical Simulation of Boiling Flow of Liquid Nitrogen in Vertical Tube

Population Balance Modelling for Subcooled Boiling Flow of Liquid Nitrogen in A Vertical Tube

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical Simulation of Heat Transfer During Boiling Flow of Cryogenic Fluid in Vertical Tube

Numerical investigation on boiling flow of liquid nitrogen in a vertical tube using bubble number density approach

Numerical Simulation for Subcooled Boiling Process of Liquid Nitrogen in Vertical Tube

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

NUMERICAL SIMULATIONS IN SUBCOOLED FLOW BOILING USING A TWO-WAY COUPLING EULERIAN-LAGRANGIAN MODEL

Numerical Prediction for Subcooled Boiling Flow of Liquid Nitrogen in a Vertical Tube with MUSIG Model

FLOW BOILING OF LIQUID NITROGEN IN MICRO-TUBE——TWO-PHASE HEAT TRANSFER ANALYSIS

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Numerical Simulation for Subcooled Boiling Process of Low Temperature Fluid with MUSIG Model

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

A Composite Model for Nucleate Boiling Heat Transfer in a Slush Nitrogen Pool

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure

Numerical Investigation of Flow Boiling Characteristics in Narrow Rectangular Channels Using Two-Fluid Eulerian Cfd Model Covering a Wide Range of Pressures

A Unifying Bubble-Layer-Based Theoretical Model for Flow Boiling and Application to a Rod Bundle

A Mechanistic Model for Slightly Subcooled Flow Boiling in Vertical Tubes