Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Numerical Simulation of Heat Transfer During Boiling Flow of Cryogenic Fluid in Vertical Tube

CFD Simulations and Experimental Verification on Nucleate Pool Boiling of Liquid Nitrogen

Observation and Analysis of the Detachment Frequency of Coalesced Bubbles in Pool Boiling Liquid Nitrogen

Numerical investigation on boiling flow of liquid nitrogen in a vertical tube using bubble number density approach

Numerical Prediction for Subcooled Boiling Flow of Liquid Nitrogen in a Vertical Tube with MUSIG Model

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Numerical Simulation Research of Bubble Characteristics and Bubble Departure Diameter in Subcooled Flow Boiling

NUMERICAL SIMULATIONS IN SUBCOOLED FLOW BOILING USING A TWO-WAY COUPLING EULERIAN-LAGRANGIAN MODEL

Numerical modeling of flow film boiling in cryogenic chilldown process using the AIAD framework

Numerical study of boiling of Liquid Nitrogen on a liquid-liquid contact plane

Numerical Study of Heat Transfer on Flow Boiling in Vertical Tube by LB Method Simulation

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Numerical Study of Patterns and Influencing Factors on Flow Boiling in Vertical Tubes by Thermal LBM Simulation

A Numerical Study of Quasi-Nucleate Boiling in Mini- and Micro Channels

Numerical Investigation of Flow Boiling Characteristics in Narrow Rectangular Channels Using Two-Fluid Eulerian Cfd Model Covering a Wide Range of Pressures

Numerical simulation of boiling behavior in vertical microchannels

Numerical simulation of cavitating flow of cryogenic liquids through a Venturi tube.

Numerical study of heat transfer and pressure drop characteristics in helical tubes based on OpenFOAM

Numerical modeling of cryogenic chilldown process in terrestrial gravity and microgravity

Numerical Simulation of Single Bubble Dynamics During Flow Boiling Conditions on a Horizontal Surface