Abstract:Cassava starch-based superabsorbent polymer was successfully synthesized using a new technology that based on modification of a Haake twin-roll mixer as reactor. The cassava starch was first gelatinized then modified by grafting under external shear stress in the reactor. The torque and temperature curves as a function of time can reflect the variations in the reactor and also offer some information about the copolymerization reaction. The advantages of this system include starch modification can be carried out (1) with high starch concentration, (2) under controlled time and (3) smaller amount of sample (60 g) required. The technology provides useful guides for reactive extrusion. The starch grafted composites were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) and thermal gravimetric analysis (TGA). The TGA was also used for determining the percentage of grafting ratio. The results show that the cassava starch has been successfully grafted with acrylamide then crosslinked by N,N′-methylene-bisacrylamide using this reactor. The ultimate water absorbent capacity of the cassava-based superabsorbent polymer impacted by various pH values illustrated that the acid and basic solutions inhibit the ability of imbibing water. Additionally, gel properties of the cassava-based superabsorbent polymer were investigated. It can be concluded that the structure of cassava gel is stable, while the three dimensional network of cassava-based superabsorbent polymer is rigid but its structure could not resist external force effectively and everlastingly since G′ was decreased with increasing amplitude.

Synthesis of Sizing Agent with Cassava Starch and Fluorinated Acrylate Monomer

Study of synthesis of sizing agent with tapioca starch and fluorinated acrylate monomer

Synthesis Of Cationic Surface Sizing Agent And Its Application

Study on the Synthesis of Starch Graft Acrylamide Copolymer and Its Flocculent Effect

Preparation of Graft Copolymer Onto Starch and Its Performance in Surface Sizing

THE SYNTHESIS AND CHARACTERIZATION OF STARCH-DMDAAC-AM GRAFT COPOLYMER

Synthesis and Flocculating Properties of Starch Graft DAC Copolymers

Preparation and Application of Fluoroacrylate Copolymer Emulsion As Surface Sizing Agent

Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin

Studies on Sythesis and Properties of Oil-resistant Sizing Agent Containing Fluorine

The Preparation of a Novel Graft Starch as Textile Sizing Agents

Preparation and application of starch graft copolymer used for sizing reinforcing agent of corrugated board surface

GRAFT COPOLYMERIZATION ONTO STARCH WITH AM-AC IN INVERSE EMULSION

Synthesis of Starch Grafted Acrylamide Copolymers and Its Mechanism

Synthesis and Application of Grafting Copolymer of Modified Starch and Acrylic Acid

Preparation of a new cationic starch graft modified flocculant

Preparation and Characterization of Enzymatically Degraded Starch-G-Poly(Styrene-Co-Butyl Acrylate) Latex for Paper Coating

THE ADHESIVE CAPACITY OF STARCH GRAFT COPOLYMERS TO POLYESTER / COTTON FIBER

Preparation of Cassava Starch-Based Superabsorbent Polymer Using a Twin-Roll Mixer As Reactor

Preparation and Performance of Organic Silicon Surface Sizing Agent

Incorporation of poly(sodium allyl sulfonate) branches on corn starch chains for enhancing its sizing properties: Viscosity stability, adhesion, film properties and desizability