Abstract:Despite its biodegradability, adequate cohesive strength and comparatively low cost, the use of cooked starch as a paper coating binder is limited due to its high viscosity and serious negative impact on the gloss. Starch-based bio-latex with size in the nanometer or sub-micrometer range has been developed recently to overcome these shortcomings. In this study, ultrafine starch particle(UFSP) was prepared by mechanical milling using a DYNO mill in combination with light chemical pretreatment. Model coating colors containing different dosages of UFSP were applied to base paper and the properties of the coated papers were evaluated. The results showed that the UFSP was disc-shaped with a median particle diameter of 167 nm. Water retention capacity of the coating colors was improved considerably with the addition of UFSP, i.e., the water retention value decreased by nearly 40% when styrene-butadiene latex was replaced by UFSP at a dosage of 3 pph(per hundred parts of pigment). The high shear rate viscosities of the coating colors containing no more than 2 pph of USFP were similar to that of the control coating color at shear strain rate higher than 2000 s-1. The properties and performances of the coated papers were comparable to the control coated paper with single synthesized latex binder. The gloss and the print gloss of paper samples with or without USFP were 59.7% and 58.2%, 79.0% and 78.8%, respectively. Surface strength of paper samples with or without USFP were 0.96 and 0.90 m/s, respectively, while the ink absorptivity values were 34% and 33%. This study demonstrates a promising approach to obtain submicrometer sized starch for paper coating.

Preparation and Characterization of Enzymatically Degraded Starch-G-Poly(Styrene-Co-Butyl Acrylate) Latex for Paper Coating

Synthesis Of Cationic Surface Sizing Agent And Its Application

Surfactant-free Hybrid Latexes from Enzymatically Hydrolyzed Starch and Poly(butyl Acrylate-Methyl Methacrylate) for Paper Coating

Preparation and application on emulsion of oxidized starch grafted poly(styrene-butyl acrylate) latex and its application

Optimization of synthesis and characterization of oxidized starch‐graft‐poly(styrene‐butyl acrylate) latex for paper coating

Preparation of starch-based styrene acrylate emulsion used as surface-treatment agent for decorative base paper

Preparation and Characterization of Oxidized Starch-Graft-Poly(Styrene-Butyl Acrylate) Latex Via Emulsion Polymerization

Preparation of Graft Copolymer Onto Starch and Its Performance in Surface Sizing

Synthesis and Flocculating Properties of Starch Graft DAC Copolymers

Preparation and application of starch graft copolymer used for sizing reinforcing agent of corrugated board surface

Study on the Synthesis of Starch Graft Acrylamide Copolymer and Its Flocculent Effect

Structure and Mechanical Properties of Starch/Styrene-Butadiene Latex Composites

Preparation of Ultrafine Starch Particle and Its Application in Paper Coating

Synthesis of Sizing Agent with Cassava Starch and Fluorinated Acrylate Monomer

Characterization and Particle Size Control of Acrylic Polymer Latex Prepared with Green Surfactants

Thermal and mechanical properties of cationic starch-graft-poly(butyl acrylate-co-methyl methacrylate) latex film obtained by semi-continuous emulsion polymerization for adhesive application

Synthesis and Application of Grafting Copolymer of Modified Starch and Acrylic Acid

Preparation optimization by response surface and performance characterization of PEG-urea-dialdehyde starch adhesive

Ball milling pretreatment facilitating α-amylase hydrolysis for production of starch-based bio-latex with high performance

Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin

Understanding the versatile roles of cellulose nanocrystals in α-amylase immobilization, starch hydrolysis, colloidal stability and printability towards advanced starch based bio-latex performance