Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Switchable dual-wavelength erbium-doped fiber laser with a tilted fiber grating

Single- and Dual-Wavelength Switchable Erbium-Doped Fiber Ring Laser Based on Intracavity Polarization Selective Tilted Fiber Gratings

A 100 Mw-Level Single-Mode Switchable Dual-Wavelength Erbium-Doped Fiber Laser

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Switchable multiwavelength ytterbium-doped double-clad fiber laser based on a multimode fiber grating

Switchable Multiwavelength Erbium-Doped Fiber Laser with Cascaded Fiber Bragg Gratings and Dual-Section Lyot–Sagnac Filter

L-Band Switchable Dual-Wavelength Erbium-Doped Fiber Laser Based on a Multimode Fiber Bragg Grating

Multiwavelength Erbium-Doped Fiber Lasers with Tilted Bragg Gratings in Single Mode Fibers

Switchable Multiwavelength Erbium-Doped Fiber Laser Incorporating A Sampled Fiber Bragg Grating Written In Polarization-Maintaining Fiber - Art. No. 67812w

Multiwavelength Erbium-Doped Fiber Lasers With Tilted Bragg Gratings In Single Mode Fibers - Art. No. 67812u

Switchable Dual-Wavelength Ytterbium-Doped Fiber Laser Based on a Few-Mode Fiber Grating

Switchable and Spacing-Tunable Dual-Wavelength Erbium-Doped Fibre Lasers

Stable and Uniform Dual-Wavelength Erbium-Doped Fiber Laser Based on Fiber Bragg Gratings and Photonic Crystal Fiber

Switchable and Tunable Multiwavelength Erbium-Doped Fiber Laser with Fiber Bragg Gratings and Photonic Crystal Fiber

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Dual Wavelength Erbium-Doped Fiber Laser with a Lateral Pressure-Tuned Hi-Bi Fiber Bragg Grating

Switchable triple-wavelength erbium-doped fiber laser using a single fiber Bragg grating in polarization-maintaining fiber

Switchable multiwavelength erbium-doped fiber laser incorporating a sampled fiber Bragg grating written in polarization-maintaining fiber

Switchable Dual-Wavelength Mode-Locked Er-Doped Fibre Laser Using A Bragg Grating in Polarization-Maintaining Fibre

A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation