Abstract:Nano, Ahead of Print. X-ray diffraction (XRD) is one of the most essential techniques for characterizing various crystals. However, when nanocrystals are present, the diffraction peaks become significantly broadened and reduced in intensity, making phase and microstructure analysis challenging. To obtain more refined microstructural information from nanocrystals, various methods have been developed to enhance diffraction peaks, with step scanning being a commonly used approach. Additionally, increasing instrument broadening (IB) by adjusting slit sizes to enlarge the irradiation area is a convenient yet often overlooked method. In this study, the effects of IB on the diffraction peak intensities of nanocrystals and micron crystals in mixed materials were thoroughly investigated. The results show that the intensities of both nanocrystals and micron crystals increase as IB increases, a behavior similar to that observed when extending the testing time during step scanning. However, the rate of increase in peak heights for nanocrystals is higher than for micron crystals, while the rate of increase in peak width for nanocrystals is lower, which is a significant departure from the effects seen in step scanning. In other words, nanocrystal peaks become sharper and more distinct as IB increases. This phenomenon is explained by the different components of peak width for nanocrystals and micron crystals, based on Lorentz mathematical model analysis. Based on these findings, it is recommended to utilize larger IBs in combination with step scanning to further reinforce nanocrystal peaks in mixed materials.

THE EFFECT OF PREFERRED ORIENTATION ON X-RAY DIFFRACTION INTEGRAL INTENSITY

The Physical Meanings of 5 Basic Parameters for an X-ray Diffraction Peak and Their Application

Effects of the Grain Orientation on the Electrocaloric Effect of Polycrystalline Ferroelectrics

Characterization of Preferred Orientation of Silver Film on Copper Substrates by X-Ray Diffraction

Determining the Preferred Orientation of Silver-Plating via X-ray Diffraction Profile

Determination of three-dimensional orientations of ferroelectric single crystals by an improved rotating orientation x-ray diffraction method.

Distinguishing and Further Reinforcement for Nanocrystal XRD Peaks Caused by Instrument Broadening in Nanomixed Materials

The diffraction power of crystals with unknown atomic structures: calculation and application in quantitative phase analysis

Orientation Dependence of Diffraction Intensities from Helical Structures

Study on the Effect of X-Ray Diffractometer Inherent Angle Scale Error on the Precision of Lattice Parameter Calculation

Refraction Angle and Edge Visibility in X-Ray Diffraction Enhanced Imaging

Application of a Near Coincidence Site Lattice Theory to the Orientations of Grains on (001)

Characterization of Polycrystalline Gradient Thin Film by X-ray Diffraction Method

Quantitative Analysis of a Textured Coating by a New X-Ray Diffraction Method

X-Ray Diffraction: Instrumentation and Applications

Orientation Effect on Intergranular Fracture Behaviors along Symmetrical Tilt Grain Boundaries in Bcc Iron

A XRD Method to Measure Orientation of Single Crystal Superalloys

Direct structure depth profiling of polycrystalline thin films by X-ray diffraction and its application

Crystal Orientation Dependence of the Portevin-Le Chatelier Effect in Instrumented Indentation: A Case Study in Twinning-Induced Plasticity Steels

Application of powder X-ray diffraction in mineralogy and petrology

X-ray diffraction performance of thermally distorted crystals