Abstract:Clinoptilolite-supported TiO2 (TiO2/CPMOCVD) has been synthesized by metal organic chemical vapor deposition method (MOCVD). Titanium precursor was evaporated at 110 °C under nitrogen flow rate to promote the surface interaction between titanium species and clinoptilolite. The effect of titanium precursor on the crystalline structure and the surface area of clinoptilolite were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), transformed infrared spectroscopy (FT-IR), Raman spectroscopy, and Brunauer–Emmett–Teller measurement. XRD and SEM results indicate that TiO2 precursor interacted with the support, decreasing the crystallinity of the clinoptilolite. The analysis by FT-IR spectroscopy further confirms that the titanium species were bound to clinoptilolite through Ti–O–Si bonds. The TiO2/CPMOCVD catalyst showed a mesoporous structure with the distribution of pores in several dimensions 3.7–7.1 nm, with high specific surface area (~ 471 m2/g). MOCVD improved the adsorption capacity of the catalyst surface towards the pollutants. TiO2/CPMOCVD particles turn yellow after adsorption of salicylic acid. The development of the yellow color is a clear indication of the formation of charge transfer titanium (IV) salicylate surface complex. Photocatalytic decomposition of SA in aqueous solution was carried out using TiO2/CPMOCVD. Experimental results revealed that TiO2/CPMOCVD required shorter irradiation time (120 min) for complete decomposition of SA than commercial P25 Degussa and TiO2/CPimp (clinoptilolite-supported TiO2 using impregnation method). The TiO2/CPMOCVD can be recycled at least four times without loss in activity, indicating their magnificent stability.

Preparation of an Ag–TiO2 photocatalyst coated on activated carbon by MOCVD

Preparation of photocatalytic TiO2 coatings of nanosized particles on activated carbon by AP-MOCVD

Synthesis of TiO(2) Supported on Activated Carbon by MOCVD: Operation Parameters Study.

Influence of Preparation Method on Morphology and Photocatalysis Activity of Nanostructured TiO2.

Preparation of TiO_2/SiO_2 and Photo-Catalytic Degradation of Methyl-Orange

Preparation of anatase TiO2 supported on alumina by different metal organic chemical vapor deposition methods

Preparation of heterogeneous photocatalyst (TiO2/Alumina) by metallo-organic chemical vapor deposition

Enhancing the Concentration of TiO2 Photocatalyst on the External Surface of Activated Carbon by MOCVD

Preparation of Heterogeneous Photocatalyst (TiO<sub>2</sub>/Alumina) by Metallo-Organic Chemical Vapor Deposition

Effect of preparation methods on the structure and catalytic performance of TiO2/AC photocatalysts

TiO2 Photocatalyst Deposition by MOCVD on Activated Carbon

Preparation of Photocatalytic Fe2O3–TiO2 Coatings in One Step by Metal Organic Chemical Vapor Deposition

Coating of anatase titania on clinoptilolite by metal organic chemical vapor deposition method: enhanced mesoporosity and photocatalytic activity

One Step Preparation of Visible-Light Responsive Fe–TiO2 Coating Photocatalysts by MOCVD

Controllable Al2O3 Coating Makes TiO2 Photocatalysts Active under Visible Light by Pulsed Chemical Vapor Deposition

Co-deposition of Photocatalytic Fe Doped TiO2 Coatings by MOCVD

A novel approach towards high-performance composite photocatalyst of TiO2 deposited on activated carbon

Preparation,characterization of titanium oxide modified by silver and their performance for photo-catalytic elimination of methanol

Study on preparation of TiO_2 loaded on activated carbon and photocatalytic properties

Preparation of TiO 2 /ITO film electrode by AP-MOCVD for photoelectrocatalytic application

Vacuum-Activated Co2+ and Ti3+ Co-Modified Tio2 with Stable and Enhanced Photocatalytic Activity