Abstract:Air quality monitoring is of major concern as it is directly linked to public health. It requires the development of high sensitive devices with fast response towards hazardous gas and volatile compounds. Such performances depend on the nature and quality of deposition of the sensing layer. Herein, adherent polypyrrole-dodecylbenzene sulfonic acid (PPy–DBSA) films were deposited on a N-(3-trimethoxysilylpropyl) pyrrole modified ITO coated polyethylene teraphtalate (PET) flexible substrate by facile direct electrochemical oxidation of pyrrole in an aqueous solution of sulfonic acid. The obtained PPy-DBSA films were subjected to various characterization techniques such as, FTIR, Raman, SEM and conductivity measurements. Chemiresistive gas sensing tests have demonstrated selectivity and sensitivity of films toward ammonia vapors over the other vapors (nitrogen dioxide, carbon dioxide, hydrogen sulfide, acetone, methanol and ethanol) with higher response at 20 ppm, reasonably fast response time of 3 min and reaching detection limit of 3ppm. The response of the sensor can reasonably be related to the strong electrostatic interactions between vapor molecules and the dopant agents within PPy films. In comparison PPy-DBSA films prepared on pristine ITO/PET has exhibited lower response at 20 ppm of ammonia exposure, which highlights the role of surface modification and the contribution from the dopant agent nature for ammonia sensing. Moreover, chemiresistive response performances have been tested in the presence of humidity, under varied temperatures, and finally their behaviors were featured by an impedance spectroscopy in both presence and absence of gas. This work conclusively shows that the sensing performances are not only driven by the molecular interactions between the sensor and the analyte but also by the quality of deposition and adhesion of the former to the transducer. The latter feature can be controlled by appropriate chemical surface modification.

Polypyrrole Film Fabrication with NH3 Gas Sensing Properties

Fabrication and Ammonia Gas Sensing of Palladium/polypyrrole Nanocomposite

Gas Sensing Properties of Surface Acoustic Wave Nh3 Gas Sensor Based on Pt Doped Polypyrrole Sensitive Film

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Self-assembly of TiO2/polypyrrole Nanocomposite Ultrathin Films and Application for an NH3gas Sensor

QCM Gas Sensor Based on Polypyrrole for Trimethylamine Detection"

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Highly Ammonia Sensing Using Direct In Situ Electro-Deposited Polypyrrole-Dodecylbenzene Sulfonic Acid Film on ITO Coated Flexible Substrates

Research In The Nh3-Gas Sensitive Properties And Sensitive Mechanism Of Polypyrrole

Study On The Nh3-Gas Sensitive Properties And Sensitive Mechanism Of Polypyrrole

Porous Polypyrrole/Polymethylmethacrylate Composite Film Prepared by Vapor Deposition Polymerization of Pyrrole and Its Application for Ammonia Detection

Fabrication of Polypyrrole Composite Film Based Trimethylamine Sensor Via Simple Method

Gas sensing properties of layer-by-layer self-assembled ultrathin film of polyaniline/titanium dioxide

In-Situ Grown Nanostructured Zno Via A Green Approach and Gas Sensing Properties of Polypyrrole/Zno Nanohybrids

Gas sensitivity of a composite of multi-walled carbon nanotubes and polypyrrole prepared by vapor phase polymerization

Highly selective NH3 gas sensor based on polypyrrole/Ti3C2Tx nanocomposites operating at room temperature

Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly

Fabrication of a Sensitive Gas Sensor Based on PPy/TiO2 Nanocomposites Films by Layer-by-layer Self-Assembly and Its Application in Food Storage

Polyaniline @ Porous Nanosphere SnO2/Zn2SnO4 Nanohybrid for Selective Room Temperature Flexible NH3 Sensor

A Flexible NO2 Gas Sensor Based on Polypyrrole/nitrogen-Doped Multiwall Carbon Nanotube Operating at Room Temperature

Electrosynthesis of polypyrrole/sulfonated polyaniline composite films and their applications for ammonia gas sensing