Abstract:Porous lead zirconate titanate–lead zinc niobate (PZT–PZN) piezoelectric ceramics with interconnected pore channels were fabricated using the camphene-based freeze-casting method. In this method, warm PZT–PZN/camphene slurries with various solid loadings (10, 15, 20, and 25 vol%) were prepared by ball milling at 60°C and then cast into molds at 20°C, resulting in the formation of solidified green bodies comprised of three-dimensionally interconnected camphene dendrite networks and concentrated ceramic particle walls. After the removal of the frozen camphene via sublimation, the samples were sintered at 1200°C for 2 h. All of the fabricated samples showed highly porous structures, consisting of fully dense PZT–PZN walls without defects, such as cracks or pores. As the initial solid loading was decreased from 25 to 10 vol%, the porosity was linearly increased from 50% to 82%. This increase in the porosity led to a reduction in the permittivity, a moderate decline in the d33 value, and a rapid decline in the d31 value, which endowed the porous samples with a high hydrostatic figure of merit (HFOM). The highest HFOM value of 35650 × 10−15 Pa−1 was achieved for the sample with a porosity of 82%, as well as ɛ33=284, dh=298 pC/N, and gh=118 × 10−3 V·(m·Pa)−1.

Ultra-high-porosity Zirconia Ceramics Fabricated by Novel Room-Temperature Freeze-Casting

Highly Porous Zro2 Ceramics Fabricated by A Camphene-Based Freeze-Casting Route: Microstructure and Properties

Camphene-based Freeze-Cast ZrO2 Foam with High Compressive Strength

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

Microstructure and Mechanical Properties of ZrB2–SiC Porous Ceramic by Camphene-Based Freeze Casting

Fabrication of Ceramics with Complex Porous Structures by the Impregnate–Freeze‐Casting Process

Porous high-entropy (Zr0.25Hf0.25Nb0.25Ti0.25)C with high strength and uniform pore structure fabricated by freeze-casting

3D Long-Range Ordered Porous Ceramics Prepared by a Novel Bidirectional Freeze-Casting Technique

Fabrication of Porous Alumina Ceramics with Directional Pore Channels Structure by Freeze-Gel Casting Processing

Fabrication Of Gradient Porous Beta-Sialon Ceramics Via A Camphene-Based Freeze Casting Process

Porous Yttria‐stabilized Zirconia Ceramics Fabricated by Nonaqueous‐Based Gelcasting Process with PMMA Microsphere As Pore‐Forming Agent

Control of Pore Size and Wall Thickness of 3-1 Type Porous Pzt Ceramics During Freeze-Casting Process

Ultra-low Energy Consumption of Preparing Unidirectional Porous Si3N4 3 N 4 Ceramics Via Freeze Casting and Combustion Synthesis

Synthesis of Porous α-Al_2O_3 Ceramics by Freeze-Casting Processing

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Microstructure and electrical properties of porous PZT ceramics with unidirectional pore channel structure fabricated by freeze-casting

Porous Y 2 SiO 5 ceramics with a centrosymmetric structure produced by freeze casting

Fabrication of Porous PZT–PZN Piezoelectric Ceramics With High Hydrostatic Figure of Merits Using Camphene‐Based Freeze Casting

Microstructure and permeability of porous YSZ ceramics with aligned and gradient pore channels fabricated by freeze casting

Control of Pore Structure During Freeze Casting of Porous SiC Ceramics by Different Freezing Modes

Ultra-low energy consumption of preparing unidirectional porous Si3N4 ceramics via freeze casting and combustion synthesis