Abstract:A new nondestructive pressure-measurement method that can avoid potential safety problems caused by applying traditional pressure-measurement methods in vessels is presented. This method utilizes ultrasonic Rayleigh waves and critically refracted longitudinal waves ( L CR waves). The change in pressure induces a change in the stresses in the vessel's wall. According to the acoustoelastic principle, variations in stress affect the wave velocity. Meanwhile, the velocity of ultrasonic waves can also be affected by the change in temperature. Considering the effect of the pressure and temperature of the vessel on both the wave velocity and propagation distance of the ultrasonic waves, the relationship between ultrasonic transit time delay and both the pressure and temperature change is established. Furthermore, a modified model of pressure measurement is deduced. With this model, a reference method for temperature compensation, without temperature measurement, is presented. The reference method utilizes Rayleigh waves and L CR waves. These two kinds of ultrasonic waves travel along the axial direction of the vessel's wall, bearing the same changes in pressure and temperature. The relationship between the reference transit time delay between two ultrasonic transducers and the pressure is established through theoretical analysis and calibration tests on an air vessel. To reduce the error caused by the unevenness of temperature distribution, which might occur in the vessel's and the transducer's material, a new kind of transducer is used in the experiment, which has two piezoelectric elements and can be used for the Rayleigh and L CR waves. A pair of such transducers is mounted along the axial direction of the air vessel. The penetration area of the Rayleigh wave is almost the same as that of the L CR wave with the use of the new transducers. Comparison tests between the new transducers and the custom-used transducers show that the new transducers have better repeatability. Finally, using the air vessel as a specimen, experimental results show that the reference method is effective and that the pressure values calculated using the reference method are close to the manometer-measured values.

Study on effect of the nonlinear phenomenon of pressure sensor to the measurement of the coefficient of air relative pressure

Study on measurement technology of dynamics characteristics of typical tubes for pressure measurements

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

Research on Air Pressure Compensation System for Transducer Underwater

Real Gas Effects on Charging and Discharging Processes of High Pressure Pneumatics

Study of Pressure Drop-Flow Rate and Flow Resistance Characteristics of Heated Porous Materials under Local Thermal Non-Equilibrium Conditions

A nonlinear regression model of pressure sensor based on SVM

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Nonlinear characteristic of pressure/temperature sensor based on conductive rubber filled by carbon black

Research on temperature and pressure interference in photoacoustic spectroscopy gas detection

Research on Pressure Measurement Model Using Surface Wave Considering Temperature Effect

Discussion and Modification of the Experiment of Measuring the Heat Conductin of Coefficient of Gas Based on the Hot-Wire Method

Study on new gas flow sensor based on hot-film probe

CO2 Measurement under Different Pressure and Vibration Conditions Using Tunable Diode Laser Absorption Spectroscopy

Improving Water Pressure Measurement Using Temperature-Compensated Wireless Passive SAW Bidirectional RDL Pressure Sensor

Effect of the Fixed Characteristics of Probe on the Detection Performance in the Non-Intrusive Pressure Measurement

Osmotic Pressure Molar Ratio Measuring System Based on Technology of Linearization

Accurate Nonlinearity and Temperature Compensation Method for Piezoresistive Pressure Sensors Based on Data Generation.

A Theoretical Study on Static Gas Pressure Measurement via Circular Non-Touch Mode Capacitive Pressure Sensor

Experiment and calculation to the pressure change in the process of cryogenic liquid non-loss storage