Abstract:The temporal evolution of ordered gamma-prime(L12)-precipitates and the compositional trajectories during phase-separation of the gamma(face-centered-cubic(f.c.c.)) and gamma-prime(L12)-phases are studied in a Ni-0.10Al-0.085Cr-0.02Re(mole-fraction) superalloy, utilizing atom-probe tomography, transmission electron microscopy, and the Philippe-Voorhees (PV) coarsening model. As the gamma-prime(L12)-precipitates grow, the excesses of Ni, Cr and Re, and depletion of Al in the gamma(f.c.c.)-matrix develop as a result of diffusional fluxes crossing gamma(f.c.c.)/gamma-prime(L12) heterophase interfaces. The coupling effects on diffusional fluxes was introduced (PV coarsening model) in terms of the diffusion tensor, D, and the second-derivative tensor of the molar Gibbs free energies, G", obtained employing Thermo-Calc and DICTRA calculations. The Gibbs interfacial free energies are (6.9 +- 1.4) mJ/m2 with all terms in D and G", which changes to (18.9 +- 2.1) mJ/m2, (37.7 +- 3.3) mJ/m2, and (-7.5 +- 1.2) mJ/m2 without including the off-diagonal terms in D, G", and both D and G", respectively. The experimental APT compositional trajectories are displayed and compared with the PV model in a partial quaternary phase-diagram, employing a tetrahedron. The compositional trajectories measured by APT exhibit curvilinear behavior in the nucleation and growth regimes, which become vectors, moving simultaneously toward the gamma(f.c.c.) and gamma-prime(L12) conjugate solvus-surfaces, for the quasi-stationary coarsening regime. The compositional trajectories are compared to the PV model with and without the off-diagonal terms in D and G". The directions including the off-diagonal terms in D and G" tensors are consistent with the APT experimental data.

Preparation of Inoculants Used in Superalloy and Analysis of the Atomic Matching Models

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

Influence of Co Contents and Super-Gravity Field on Refinement of In-Situ Ultra-Fined Fibers in Al-2.5Ni Eutectic Alloys

Grain Refinement Mechanism at High Undercooling of Ni80Cu20 Alloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Grain refinement mechanism of soft-magnetic alloys with nanocrystals embedded in amorphous matrix

Grain Refinement of Undercooled Single-Phase Fe70Co30 Alloys

Refinement Mechanism of Microstructure of Undercooled Nickel Based Alloys

Solidification Structure Of Undercooled Alloys

Research on grain refinement mechanism in undercooled Fe75Ni25 alloy

Grain Refinement of Superalloy In718c by the Addition of Inoculants

Probing the formation mechanism of hierarchical microstructures in experimental Ni-based superalloys

Effect of initial mixed grain microstructure state of deformed Ni-based superalloy on its refinement behavior during two-stage annealing treatment

Microstructure refinement mechanism upon deeply undercooled solidification of a Ni88Cu6Co6 alloy

Phase transformation and segregation to lattice defects in Ni-base superalloys

The effects of diffusional couplings on compositional trajectories and interfacial free energies during phase separation in a quaternary Ni-Al-Cr-Re model superalloy

Grain refinement of superalloys K3 and K4169 by the addition of refiners

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

RETRACTED: Atomic Scale Interfacial and Compositional Characteristics of the Σ and Γ Phases of Ni-based Single-Crystal Superalloys

Grain Refinement Mechanism of Al-5Ti-1B Master Alloy by Ab Initio Calculations

Grain Refinement and Grain Coarsening of Undercooled Fe–Co Alloy